1.
Two completely different schemes for cooling water flow are obtained by changing the diesel engine's water flow from the oil condenser to the water jacket of the cylinder block.
通过改变柴油机从机油冷却器流入机体水套的水流动方式，得到两种完全不同的冷却水流动方案。
2.
For example, cooling water circulate constantly through the tuyere, hearth staves, bosh and inwall cooling plate etc.
例如，冷却水不停地在风口、炉身、炉腹和内壁冷却板等部位循环流动。
3.
Flow Analysis in Cooling Water Jacket of Engine Based on Three Dimensional CFD Technology
基于三维CFD技术的发动机冷却水套流动分析
4.
Mold temperature is controlled by water flow in cooling channels.
模具温度可用冷却槽中水的流动来控制。
5.
Design of the Big Power Silicon Rectifying Tank Cooling Water Automatic Supply System;
大功率硅整流柜冷却水的自动补给系统设计
6.
Flow Characteristic of Undershot Water in ACC System During Flat Hot Rolling
板带钢加速冷却过程中下冲水的流动特性
7.
A cooling device, as in automotive engines, through which water or other fluids circulate as a coolant.
冷却器一种冷装置，如用在汽车发动机内，水或其它流体作为冷却剂在其为内部循环
8.
To cool(an engine)with water, especially circulating water.
用水冷却用水，尤其是循环水冷却（发动机）
9.
The cooling system takes heat away from the engine by circulating a liquid coolant (water mixed with antifreeze) between the engine and a radiator.
冷却系统通过在发动机和散热器之间流动的液体冷却液（加了防冻液的水）使发动机降温。
10.
EFFECT OF CONJUGATE HEAT TRANSFER AND INTERNAL COOLANT FLOW ON FILM COOLING
耦合传热和冷却流通道流动对气膜冷却的影响
11.
Influential rule of cooling water flow on the cooling effect of big bars
冷却水流量对大直径棒材冷却效果的影响规律
12.
Numerical Simulation on Liquid-solid Two-phase Flow of Water Cooling Pipe in Blast Furnace Cooling Stave
高炉冷却壁冷却水管内液固两相流的数值模拟
13.
Adjust cooling flow and water flow (water) according to operating data.
根据操作参数调节冷却水量和水流量。
14.
Determination of trace copper in circulating cooling water based on flow-injection and ion selective electrode technology
流动注射-离子选择电极电位法测定循环冷却水中痕量铜
15.
Study and aerodynamic design of axial cooling fan on multiple units
动车组轴流冷却风机气动设计与研究
16.
Numerical Simulation for Flow and Heat Transfer of Engine Coolant
发动机冷却液流动与传热的数值模拟
17.
"The water pump, driven by a belt from the engine crankshaft, circulates the cooling liquid between the radiator and engine water jackets."
水泵由发动机曲轴上的皮带驱动,使冷却液在散热器与发动机水套之间循环流动。
18.
kept cool or designed to be kept cool by means of water especially circulating water.
通过水尤其是循环的水流而保持冷却或被保持冷却的。