1.
FATIGUE LIFE PREDICTION FOR NOTCHED SPECIMENS UNDER MULTIAXIAL NON-PROPORTIONAL LOADING AT HIGH TEMPERATURE
高温多轴非比例加载下缺口试样的疲劳寿命预测
2.
General Description of Multiaxial Low Cycle Fatigue under Nonproportional Loading
多轴低周非比例加载下疲劳寿命预测方法综述
3.
For the multiaxial proportional loading, the dispersion degree of fatigue cracks was low.
在多轴比例加载条件下，裂纹分布的分散性较小。
4.
BIAXIAL COMPRESSIVE BEHAVIOR OF CONCRETE SUBJECTED TO NON-PROPORTIONAL LOADS AFTER SUFFERING CYCLES OF FREEZING AND THAWING IN SEAWATER
海水中冻融循环后的混凝土在非比例加载下的双轴受压性能研究
5.
Application of Proportional Relief Valve in Hydraulic Loading System of Tension Bearing Test Equipment
比例溢流阀在轴承试验液压加载系统中的应用
6.
Constitutive Theory of Crystal Plasticity under Non-Proportional Cyclic Loading;
非比例循环加载下的晶体塑性本构理论
7.
Constitutive Model for Non-Proportionally Multiaxial Time-Dependent Ratcheting of 304 Stainless Steel
304不锈钢非比例多轴时间相关棘轮行为的本构模型研究
8.
Multiaxial Low Cycle Fatigue Life Prediction under Irregular Loadings;
多轴非规则载荷下低周疲劳寿命预测
9.
Constitutive Description of Tin-Lead Solder 63Sn-37Pb under Multiaxial Loading;
多轴加载下焊锡钎料63Sn-37Pb的本构描述
10.
For the nonproportional loading the dispersion become larger with the phase difference increasing.
在非比例加载条件下，随著相位差的增大，分散性增大。
11.
The reasonable axial compression, load angle and the ratio of stirrup of special-shaped columns are gained from the contrastive analysis.
通过对比分析，得出了异形柱比较合理的轴压比和加载角度。
12.
Warm Extrusion Forming Technology with Multi-direction Load and Die Design for Abnormal-axes
异形轴多向加载温挤压成形工艺及模具设计
13.
Study on Multiaxial Cyclic Stress of Varying Amplitude Fatigue Crack Growth Rate
多轴变幅加载下疲劳裂纹扩展速度的研究
14.
Numerical Simulation of the Fatigue Nonproportional Hardening Rule under Nonproportional Loading;
复杂荷载下疲劳的非比例硬化数值模拟
15.
Study on Low Cycle Fatigue Fracture Surfaces of Titanium Alloy BT9 under Non-proportional Loadings
钛合金BT9非比例载荷低周疲劳断口显微分析
16.
Study of loading simulation system with a electric-hydraulic proportional relief valve
基于电液比例溢流阀的模拟加载系统研究
17.
Research on Stress-Strain Analysis and Life Predictions for Notched Specimens under Multiaxial Loading;
多轴加载下缺口件应力应变分析与寿命预测的研究
18.
Increasing proportions of the tree's pollen reduced the percentage of full seed and retarded growth of the epicotyl.
树木本身花粉比例的增加使饱满种子的比例降低，并使胚轴生长缓慢。