1.
Simulative Model Test Study on U-shape Thin-wall Pre-stressed Concrete Aqueduct;
大型现浇预应力混凝土U形薄壳渡槽仿真模型试验研究
2.
Design of the Moulding Board and Concrete Pouring Technique for U-type Thin Shell Flume Without Symmetrical Lacing Wire Support
U型薄壳大渡槽无对拉筋支撑、模板设计及混凝土浇筑施工技术
3.
Simulation Analysis of Temperature and Stress of U-aqueducts
U形渡槽施工期温度模拟与应力分析
4.
Research on the Destruction Mechanism to Preventing and Curing Technology in the Thin Shell Aqueduct of Armored Concrete
钢筋混凝土薄壳渡槽破坏机理与防治对策研究
5.
Optimization design of prestressing tendon without bond in U-shape aqueduct bridge
U型渡槽环向无粘结预应力钢绞线束优化设置
6.
a device that gauges the level by showing the surface of the water in a trough or U-shaped tube.
在槽或U形管内显示水位的测量仪器。
7.
Experiment and Research on the Cylinder Measuring Water Device for U-shape Channel;
U形渠道圆柱体（筒）量水槽试验研究
8.
Analysis on Measurement Results of Stresses and Strains of Concrete Retaining Walls of "U"-shaped Road Channel
U形槽混凝土挡墙应力、应变测试分析
9.
Numberical Simulation of Flow Measurement Flume Based on Fluent;
U形渠道抛物线形量水槽数值模拟研究
10.
THE U-TRANSFORMATION-FINITE ELEMENT METHOD FOR RECTANGULAR THIN-PLATE BENDING PROBLEMS
矩形薄板弯曲问题的U变换-有限元法
11.
Study on numerical simulation of static wind load of the double rectangular aqueduct
矩形双渡槽静风荷载的数值模拟研究
12.
Research on Fatigue Failure of Reverse Vaulted and Notched Thin Metallic Shell under Uniform Pressure;
均匀压力下反拱带槽金属薄壳的疲劳特性研究
13.
Analysis for Distortional Buckling of Cold-formed Thin-walled C-section Steel in Bending;
冷弯薄壁C形槽钢受弯畸变屈曲分析
14.
Study on the Beam-Shell FSI Dynamic Model and Its Engineering Applications of Large Aqueduct
大型渡槽梁壳流固耦合动力模型及其工程应用研究
15.
Analysis for Prestress Loss of Rectangle Aqueduct Concrete Structure with Multi-side Walls
多侧墙矩形渡槽预应力损失规律测试分析
16.
Influence of the Dynamic Response of Aqueduct Structure Under Different Support
不同支座形式对渡槽结构地震响应的影响
17.
Finite element simulated analysis in operational process for Shahe prestressing rectangular aqueduct
沙河预应力矩形渡槽运营期有限元仿真分析
18.
Impact Analysis of the Ring Slot around the Bearing Shell of Top Rollers on Cot Telescoping Process
上罗拉轴承外壳环形槽对套制胶辊的影响分析