1.
Energy-lossing analysis and calculation of auxiliary thermodynamic system in a power plant with double reheat cycles
二次再热机组热力系统辅助成分能损分析与矩阵计算方法
2.
Matrix method of heat economy analysis for secondary reheat fossil fuel-fired unit
二次再热火电机组热力系统热经济性矩阵分析方法
3.
A Study of Heat Economy Calculating Model for Thermal System in Supercritical Pressure Power Unit with Second Reheat Cycles
二次再热超临界机组热力系统热经济性计算模型的研究
4.
FEM simulation of hot rolling process in the second pass considering dynamic recrystallization in the first pass
考虑一道次动态再结晶的二道次热轧仿真
5.
Study on the Second Use of Regenerated Waste Water in the Treatment Equipment of Heat and Power Plant;
热电厂水处理设备的再生废液二次利用研究
6.
Primary recrystallization microstructure of low temperature hot roll oriented silicon steel bearing copper
含铜低温热轧取向硅钢初次再结晶组织研究
7.
Research on the Performance Calculating Models in Reheating Units;
大型火电再热机组性能计算模型研究
8.
Adjusting Method of Reheater Desuperheating Water Flow of 300MW Unit
300MW机组再热减温水流量的调整方法
9.
Causal Investigation into Tertiary Reheater Tube Leakage of 700MW Unit
700MW机组三级再热器管子泄漏原因分析
10.
Model SY4500 Hot-in-place Reclamation and Repaving Machine Train for Asphalt Pavements
SY4500型沥青路面就地热再生重铺机组
11.
Analysis and Solution for Tube Explosion of 600 MW Units Boiler Reheater
600MW机组锅炉再热器爆漏的分析与对策
12.
FEM Simulation of Second Hot Rolling Considering Microstructure Evolution during First Pass and Time Interval
考虑一道次及道次间隔期间组织演变的二道次热轧仿真研究
13.
Control Etrategy and Optimization of Primary Frequency Modulation on Thermal Power Unit
供热发电机组一次调频策略及其优化
14.
Reheated microstructures of semi-solid ingots of TiC_p/7075Al composites
TiC_p/7075Al基复合材料半固态坯料二次加热组织
15.
Casting and remelted microstructures of ZL201 alloy obtained by liquidus semi-continuous casting
ZL201合金液相线铸造与二次加热的合金组织
16.
Reformation of secondary air flow measurement device for 300MW unit
300MW机组二次风测风装置的改造
17.
You never get a second chance to make a first impression.
你永远不会有第二次机会再造第一印象。
18.
600MW Units Reheater Emptuing Pipe Socket Cracking Analysis and Governance
600MW机组再热器排空管座开裂原因分析与治理