1.
Examination of Yield Criterion for Orthotropic Materials
对于正交异性材料屈服准则的实验验证
2.
Micro-scale Effect on Dynamic Void Growth and Yield Behavior of Porous Material under Impact Loading;
冲击载荷下含孔洞材料屈服及孔洞动态演化的微尺度效应
3.
Exploration on Using Strain Rate and Displacement Rate to Determine the Yield Strength of Metal Materials
应变速率和位移速率对测定金属材料屈服强度影响的探讨
4.
FEA OF EVALUATING MATERIAL YIELD STRENGTH AND STRAIN HARDENING EXPONENT USING A SPHERICAL INDENTATION
球形压痕法评价材料屈服强度和应变硬化指数的有限元分析
5.
On the Theory of Small Platic Region for A Power Hardening Material
幂硬化材料工型裂纹的小范围屈服理论
6.
RESEARCH ON THE MECHANICAL AND DAMPING CAPABILITY OF DIFFERENT YIELD METALS
不同屈服点金属复合材料力学和阻尼性能研究
7.
Original Yield of 2.5D Woven Composites Loaded in Weft
2.5维机织复合材料纬向拉伸过程初始屈服准则
8.
Post Buckling Behavior Analysis of Composite Laminated Plates and Shells Structures;
复合材料层合结构屈曲和后屈曲研究
9.
The yield strength, tensile strength and impact toughness of the material after iron plated do not obviously reduce.
镀铁后材料的屈服强度、拉强度和冲击韧性值未发生明显下降。
10.
Analysis of Crack Tip Plastic Zone for Composites under Small Scale Yielding
小范围屈服条件下复合材料裂纹尖端塑性区分析
11.
When the material does not display a yield point, a quantity known as the proof stress is used when making design calculations.
当材料不显示屈服点时，在进行设计计算中，往往使用所谓弹性极限这一数值。
12.
The conventional photoelastic modes and procedures suffice to indicate whether or not the yield point of the material of the prototype will be exceeded.
常用的光弹性模型和方法能够指明原型材料的屈服点是否将被超过。
13.
Study on Increasing Yield Strength of Q345B Plate in JISCO;
提高酒钢Q345B板材屈服强度研究
14.
Nonlinear Thermal Buckling of Laminated Composite Shallow Spherical Shell;
复合材料层合扁球壳的非线性热屈曲
15.
Buckling behavior analysis of composite stiffened plates
复合材料加筋板剪切屈曲有限元分析
16.
Research on Creep Buckling and Post-Buckling for Columns, Plates and Honeycombs;
杆、板与蜂窝材料结构的蠕变屈曲及后屈曲问题研究
17.
The Buckling and Postbuckling Analysis of Doubly-curved Composite Shells with Nonlinear Finite Element Method;
复合材料双曲率壳屈曲和后屈曲的非线性有限元研究
18.
Post Buckling Behavior of Stiffened Composite Plates under Shear Loading;
复合材料加筋板在剪切载荷下的屈曲与后屈曲研究