1.
Analysis on Cracking Reason of 1Cr18Ni9Ti Steel Furnace Tube
1Cr18Ni9Ti钢炉管开裂原因分析
2.
Analysis on Causes of Peeling and Cracking of Surfacing Welding Layer of Hydrocracking Reactor
加氢裂化反应器堆焊层剥离和开裂原因分析
3.
Investigation into Cracking of SWRCH 22A Cold Forging Rod;
SWRCH22A冷镦钢盘条开裂原因分析
4.
Causes And Resolvents To Cracks In Self-Hardening ResinSand Mould;
自硬树脂砂型的开裂原因及防止措施
5.
Xinsteel 1300 m~3 BF Cracking Skin Cause Analysis
新钢1300m~3高炉炉皮频繁开裂原因分析
6.
Cracking Reason of the Head of ML20MnTiB High-strength Bolt
ML20MnTiB高强度螺栓头部开裂原因分析
7.
Analysis to Tube Crack of TP304H Pendant Reheater
TP304H屏式再热器钢管开裂原因分析
8.
Causes of main girder cracking of metallurgy crane
冶金起重机主梁开裂原因分析及启示
9.
Reinforcement method of rectangular entity pier cracking
矩形实体墩开裂原因与加固方法研究
10.
Steam Generator Cracking Analysis and Countermeasures
在用蒸汽发生器开裂原因分析及对策
11.
Crack reason analysis on SAE1141H steel spline shaft after heat treatment
SAE1141H钢花键轴热处理后开裂原因分析
12.
Analyzing the Cause of 42CrMo Crankshaft Cracking by Upset Forged
42CrMo曲轴镦锻开裂原因分析
13.
REASON AND PREVENTION TREATMENT FOR CRACK OF CEMENT-BASED PERLITE SOUND ABSORBING PANEL
水泥基珍珠岩吸声板开裂原因及防治
14.
Analysis on Crack Reason of Working-face of Wheel Surface-quenched by Flame
车轮踏面火焰表面淬火开裂原因初探
15.
Analysis on Cause of Cracking in 06Cr19Ni10(304) Hot Rolling Stainless Steel Welded Pipe
06Cr19Ni10(304)热轧不锈钢焊管开裂原因分析
16.
Analysis of Cracking Causes of Impeller of Rich Gas Compressor and Countermeasure
富气压缩机叶轮开裂原因分析及对策
17.
Analysis of the Reasons on Gunite Lining Failure During Drift Excavation and the Preventive Measures
锚喷支护巷道崩壳开裂原因分析及预防实践
18.
Highway Hollow Plate Analysis of the Reasons for Cracking;
高等级公路桥梁空心板开裂原因分析研究