1.
Study on Properties of Mixing Elements in Melt Conveying Zone of Intermeshing Counter-Rotating Twin Screw Extruder;
啮合异向双螺杆挤出机熔体输送段混合元件性能的研究
2.
Numerical Simulation of Reactive Extrusion Processes for Free Radical Polymerization in Counter-rotating Twin Screw Extruder;
啮合异向旋转双螺杆挤出机内自由基聚合反应挤出过程的数值模拟
3.
Theoretical and Experimental Study of NI-MPE in Intermeshing Co-Rotating Twin-Screw Extrusion;
啮合同向双螺杆挤出过程非啮合多过程元件的理论及实验研究
4.
The application of the meshing theory of gear to abnormal noise
齿轮啮合原理在解决变速器异常噪音上的应用
5.
Effect of different teeth number on phenomenon of trapping oil in external spur-gear pump
异齿数对外啮合齿轮泵困油现象的影响
6.
a shaft with screw thread (the worm) meshes with a toothed wheel (the worm wheel); changes the direction of the axis of rotary motion.
螺纹杆与齿轮相啮合；改变轴旋转运动的方向。
7.
Simulation of Flight Element Runner in Co-Rotating Twin Screw Extruder;
啮合同向双螺杆挤出机螺纹元件流场分析
8.
The Engaging Load and Axial Modification of Helical Gear Used in Increasing Gearbox of Wind Turbine Generator;
风机增速器斜齿轮啮合载荷及齿向修形的研究
9.
A Global Model for Polymer Flows in Co-rotating Twin Screw Extruder;
啮合同向双螺杆挤出机挤出过程模拟研究
10.
Study on Gearing Theory for Manufacturing of Epicycloidal Bevel Gears;
面向制造的摆线齿锥齿轮啮合理论研究
11.
The Simulation of Dispersive Performance of the Intermeshing Co-Rotating Twin-Extruders;
啮合同向双螺杆挤出机分散混合性能的数值模拟研究
12.
Influence of Screw Configurations on Mixing Effect of Polymer Compounding in Co-Rotating Twin Screw Extruder;
啮合同向双螺杆构型对共混体系混合效果影响的研究
13.
Study on a New Mixing Element and Screw Configuration in Intermeshing Co-Rotating Twin Screw Extruder;
啮合同向双螺杆挤出机新型混合元件及螺杆构型的研究
14.
Forecast and Experimental Study of Melt Filled Length of Screw Assembled Field in An Intermeshing Co-rotating Twin Screw Extruder
啮合同向双螺杆挤出机组合流道的熔体充满长度预测与实验研究
15.
Effect of Co-Rotation Twin-Screw Extruder Screw Assembly on Mechanical Performance of Glass Fiber-Reinforced AS
同向啮合双螺杆挤出机螺杆组合对玻纤增强AS力学性能的影响
16.
To join or attach by means of a joggle.
榫接，啮合用啮合扣或接榫连接或安装
17.
A Periodically Time-varying Mesh Stiffness Model for Spur Geared System Considering the Effect of Extended Tooth Contact
考虑延长啮合时齿轮副啮合刚度模型
18.
Press the cowl top trim panel down until the snap clip retainers engage in the top of the instrument panel.
向下压仪表板顶部饰板，直至夹扣定位器啮合到仪表板顶部。