1.
Effect of Nitrogen Doping on Reduction of NO with Metal/Activated Carbon;
渗氮处理对金属/活性炭还原NO活性的影响研究
2.
Test of Wear Resistance on Piston Rings Treated by Rare-earth Ion Carburizing after Quenching and Tempering
活塞环调质稀土离子渗氮处理耐磨性能试验
3.
Surface Texturing and Plasma Nitriding Treatment of Titanium Alloy and Study of Its Bio-tribological Properties;
钛合金表面织构与等离子渗氮处理及其生物摩擦特性研究
4.
Surface Compound Treatment of C-N Multi-elements and RE-B-C-N Multi-elements Deep-penetrating
碳氮共渗-深层稀土硼碳氮共渗复合处理
5.
Passivating Treatment of Multiple Nitriding Layer for 15-5PH Stainless Steel
15-5PH不锈钢多元渗氮层的钝化处理
6.
Nitrogen Removal in Consolidated Treatment of Leachate and Municipal Wastewater
垃圾渗滤液与城市污水合并处理脱氮
7.
Effect of Nitrogen Doping and Heat Treatment on Reduction of NO with Activated Carbons and Mechanisms Thereof;
渗氮和热处理对炭还原NO的活性影响及机理研究
8.
Test Research on Nitrogen Removal of Landfill Leachate by Aged Refuse;
矿化垃圾处理渗滤液中氮化物的试验研究
9.
Surface Nanocrystalline Treatment and Low Temperature Gas Nitriding of Steels;
钢铁表面纳米化处理与低温气体渗氮研究
10.
A Study on the Plasma Electrolytic Nitrocarburising Treatment for Steels Surface;
液相等离子体法钢材表面碳氮共渗处理的研究
11.
Study of the Duplex Treatments of Plasma Nitrocarburizing and Post-Oxidation
离子氮碳共渗加后续氧化复合处理的研究
12.
Treatment Technologies of High Ammonia Nitrogen in Urban Landfill Leachate
城市垃圾渗滤液中的高浓度氨氮处理技术
13.
Achieving nitrogen removal from landfill leachate via UASB-A/O process
UASB-A/O工艺处理垃圾渗滤液短程生物脱氮的实现
14.
Experimental research on treatment of landfill leachate containing high concentration of ammonia-nitrogen by MAP process
MAP法预处理高氨氮垃圾渗滤液的试验研究
15.
Effect of surface mechanical attrition treatment on plasma nitriding behavior of H13 steel
表面机械研磨处理对H13钢离子渗氮行为的影响
16.
The heat treatment technology of carbo- nitriding of steel has the characteristic of lower treatment temperature and direct quenching.
钢的碳氮共渗热处理工艺具有共渗温度低、直接淬火等特点。
17.
Effect of Ion Nitriding-Sulfurizing Composite Treatment on Tribological Behavior of Ti-6Al-4V
离子渗氮—渗硫复合处理对Ti-6Al-4V合金摩擦学性能的影响
18.
Effect of Nitriding-sulfurizing Composite Treatment on Tribological Behavior of Titanium Alloy
渗氮-渗硫复合处理对Ti-6Al-4V合金摩擦学性能的影响