1.
Usually the rake body makes the static readings high, and by shortening the tipstatic-orifice distance the error can be eliminated.
一般排管架使静压读数偏高,缩小管端静压孔的距离可以消除这个误差。
2.
Deformation of Porous Pad of an Aerostatic Porous Thrust Bearing
空气静压多孔质止推轴承多孔质圆板的变形
3.
Study of Macroporous Ceramic Pipes Prepared in Cold Isostatic Pressing
冷等静压法制备大孔径多孔陶瓷管研究
4.
Relative Factors Affecting Static Performance of Aerostatic Porous Bearings
影响空气静压多孔质轴承静态性能的有关因素
5.
The Preparation and Characterization of β-TCP by Isostatic Compaction Method;
多孔β-TCP生物陶瓷的等静压成型
6.
Technical Analysis of PHC Pipe Pile with Self-Guide Hole Static Pressure at Pile Tip
桩端自引孔静压PHC管桩的技术分析
7.
Research and Application on Holding Type PHC Tube Pile with Tip Entering into Rock by Augering Technique;
抱压式桩端自引孔静压入岩PHC管桩研究与应用
8.
Investigation of Pressure Distribution of Partial Porous Aerostatic Thrust Bearing
局部多孔质气体静压止推轴承压力分布的研究
9.
The analysis of interval between long screw auger taking clay and static pressuring pile
长螺旋钻孔取土与静力压桩时间间隔的分析
10.
The Mechanism Study of the Consolidation Coefficient of Soils Determined by Piezocone Penetration Test;
孔压静力触探测试土的固结系数机理研究
11.
Research on Key Technologies of Partial Porous Externally Pressurized Gas Bearing;
局部多孔质气体静压轴承关键技术的研究
12.
Field Operation of CPTU Instrument and Needing Attentions
孔压静力触探设备野外操作方法及注意事项
13.
FEM numerical simulation of hole expansion caused by driving static pressure pile
静压桩挤土扩孔的有限元数值模拟研究
14.
Quasi-static compression behaviors of cylindrical tubes filled with open-cell aluminum foam
开孔泡沫铝填充圆管的准静态压缩行为
15.
Analysis of Pore Pressure Static Cone Penetration Test to determine Soft Clay Strength
孔压静力触探确定软粘土地基强度方法分析
16.
Influence of prebored hole measures on compacting effects of jacked piles
预钻孔措施对静压桩挤土效应的影响分析
17.
Study on Static Performance of a Gas-Lubricated Laser Surface Textured Mechanical Seal
激光加工多孔气体端面密封的静压性能研究
18.
Experimental Research on the Static Characteristics of Water Hydraulic Servo Valve Caused by Fixed Damp Orifice
固定阻尼孔影响水压伺服阀静态特性试验研究