1.
metallic hollow O-rings of non self-energizing
非自紧式金属空心O形环
2.
Elastoplastic Contact Analysis of Metal O-ring Based on ANSYS
基于ANSYS的金属O形环弹塑性接触分析
3.
Remove the pressed in relief valve seat and seat O-ring.
拆卸压进去的安全阀阀座和阀座O形环。
4.
Kits include: Disc& Spring assembly, Cover O-ring and lubricant.
组件包括：阀瓣和弹簧总成，阀盖O形环和润滑剂。
5.
Position flywheel and O-ring on crankshaft and align bolt holes.
安装飞轮和O形环在曲轴上并对齐螺栓孔。
6.
Obtain new filter/regulator (two new o-rings should already be installed) .
找到新的滤清器/调节器（两个新O形环应已安装）。
7.
An O-ring seals the relief valve body to the main housing.
用一个O形环密封安全阀阀体与主外壳。
8.
PREDICTION MODEL ABOUT THE SPRINGBACK AMOUNT ON AN O-RING SPECIMEN OF 304 STAINLESS STEEL
304不锈钢O形环回弹量的预测模型研究
9.
Reinsert the check modules and O-rings into body in direction of flow.
沿着流向将止回模块和O形环重新插入到阀体内。
10.
The check valves shall be modular and shall seal to the main valve body by the use of an O-ring.
止回阀应该是模块化，并通过一个O形环密封连接到主阀体上。
11.
Seal Performance Analysis of O-Ring Between Stainless Steel and Aluminum Alloy
不锈钢与铝合金材料之间密封用O形环性能分析
12.
"On the standard seals, the secondary sealing bellows (flexible elastomer bellows) and the o-ring are Viton material for maximum performance."
在标准的密封上,次密封波纹管(柔软的弹性波纹管)和O形环采用性能最好的氟橡胶材料。
13.
It has two stem sealing: one is stuffing box and another is toroidal sealing ring( O-ring).
本阀阀杆密封分为两种形式：一为填料密封；一为O型密封环密封。
14.
After saturation the specimen is fitted into the lower half of a special cell, being sealed by O-Rings.
试件浸透水后，便装入一个专用的O形封闭环的容器的下半部中。
15.
Since 0-4 is blocked by attachment of the second D-glucopyranosyl unit, a furanose ring cannot form.
因为O-4通过与第二个D-吡喃葡萄糖单元连接而被保护,环不能形成。
16.
metal O-ring and nonmetallic O-ring seal
金属-非金属双O型环密封
17.
Gaskets and O rings are made of elastomers.
密封垫和O型环是由人造橡胶制成的。
18.
Study on the Environmental Behavior of Biomimetic Synthetic Fungicides of o-Allphenol and p/o-Butanoylphenol;
仿生合成杀菌剂o-烯丙基苯酚、p/o-丁酰基苯酚环境行为研究