1.
LOWER TRACK BAR BOLT INSTALLATION
下横拉杆螺栓的安装
2.
tightening bolt
拉紧螺栓，(铁)风口拉杆
3.
Position lever assembly on floorpan and install lever mounting bolts.
将拉杆组合放置到底板上并安装拉杆固定螺栓。
4.
Tie Rod End To Steering Knuckle Nut
转向拉杆端与转向关节螺栓
5.
Tie Rod End Adjusting Sleeve Nut
转向拉杆端调整轴筒螺栓
6.
Remove the nut and bolt attaching the track bar to the track bar mount on the body of the vehiclRemove the track bar from the track bar mount.
拆卸接合横拉杆与位于车身之横拉杆固定座的螺帽与螺栓。将横拉杆自横拉杆固定座拆卸下来。
7.
draw-bar carrier bolt
牵引杆托(板)螺栓
8.
Install connecting rod bolt protectors on rod bolts.
在连杆螺栓上安装连杆螺栓保护件。
9.
Hexagon bolts with split pin hole on shank--Reduced shank--Product grade B
GB/T31.2-1988六角头螺杆带孔螺栓细杆B级
10.
" Bolts, small hexagon head with fit neck and hole through the shank"
GB/T24-1976小六角头螺杆带孔导颈螺栓
11.
" Bolts, small hexagon head with hole through the shank"
GB/T23-1976小六角头螺杆带孔螺栓
12.
Hexagon bolts with split pin hole on shank--Product grade A and B
GB/T31.1-1988六角头螺杆带孔螺栓A和B级
13.
"When bolting to steel flanges, longer bolts or stud may be required."
当用螺栓与钢法兰连接时,可能需要更长的螺栓或螺杆。
14.
Hexagon flange bolts--Reduced shank--Product grade B
GB/T5788-1986六角法兰面螺栓--细杆--B级
15.
Hexagon bolts with wire holes on head--Reduced shank--Product grade B
GB/T32.2-1988六角头头部带孔螺栓细杆B级
16.
Hexagon head bolts-Reduced shank-Product grade B
GB/T5784-1986六角头螺栓--细杆B级
17.
Remove bolts holding shift lever to transmission.
拆卸将排挡杆固定到变速箱的螺栓。
18.
Force Analysis of Chord Bolts of Type-321 Assembled Steel Bridge
“321”装配式公路钢桥弦杆螺栓受力分析