1.
The Theory Research and Simulation Analysis on Scroll Discharge Screen Centrifuge;
螺旋卸料过滤离心机的理论研究与仿真分析
2.
Desingn of Three-phase Decanter Centrifuge;
三相卧式螺旋卸料沉降离心机的设计研究
3.
Strength and Vibration Analysis of Screw Conveyor of Decanter Centrifuge;
卧式螺旋卸料沉降离心机的螺旋强度和振动分析
4.
Design and Realization of the Control System of Horizontal Screw-conveyor Centrifuge;
卧式螺旋卸料离心脱水机控制系统的设计与实现
5.
Research on Rapid Design System of Centrifuge;
卧式螺旋卸料离心脱水机快速设计系统的研究开发
6.
The Helix-motion Unload Machine of No.3 Sintering Shop Electric Control System Perfection and Technology Transform’s Summary
三烧结车间螺旋卸车机电控系统完善和改造技术分析
7.
unloading auger clutch lever
卸粮螺旋离合器接合杆
8.
compression refuse collector
旋转板自装卸垃圾车
9.
unloader's cutting auger
卸载机切碎螺旋推运器
10.
Reform of Screw-lifting Dumping Cart
螺旋升降式卸料小车改造试验——散粮卸车新途径
11.
chain out the hole
起钻时不用转盘而用旋绳器卸扣
12.
The relief valve should be able to be removed by unscrewing the relief valve from the housing.
通过从外壳上旋下安全阀应该能够拆卸安全阀。
13.
Remove the battery holder by turning the battery holder screw counterclockwise with a coin.
用硬币逆时针旋开电池室上的螺丝,卸下电池室。
14.
THE ENVELOPE CURVE EQUATION OF SWEEP AUGER FOR DISCHARGE GRAIN DIVIDED IN LAYER FROM A CYLINDER BIN
分层卸粮扫仓螺旋输送器轮廓曲线方程
15.
Remove the throat plate, loosen hook screw 6 and adjust the hook.
调整旋梭时，请卸下针板，拧松旋梭固定螺丝6，然后进行调整。
16.
Loosen scale retaining ring and remove turn indicator assembly. It is not necessary to change the memory set point.
松开刻度固定环，拆卸旋转指示器总成。不需要改变记忆设置点。
17.
Remove bypass hose from test cock No. 1, open shutoff valve No. 1.
从测试旋塞1号上拆卸旁路软管，开启1号关闭阀。
18.
It can be removed by simply unscrewing with a large pipe wrench.
只需用一把较大的管道扳钳旋下螺纹就可以拆卸底部塞弹簧总成。