1.
Study of Preparation of New Controllable Low-Strength Material with Desulphated Slag
脱硫灰渣制备新型控制性低强度材料的研究
2.
Study on Splitting Strength as Standards of Semi-Rigid Base Material
劈裂强度作为半刚性基层材料强度控制指标的可行性研究
3.
These materials exhibit low strength.
这些材料具有低强度。
4.
Controlled Synthesis and Properties of Some Low-dimensional Nanomaterials;
一些低维纳米材料的控制合成与性质
5.
Controlled Synthesis and Property Study of Low-dimensional Nanostructured Materials;
低维纳米结构材料的可控制备与性能研究
6.
Low-Dimensional Nanomaterials: Controlled Growth, Characterization and Property Study;
低维纳米材料的可控制备、表征及性质研究
7.
Wwlding material: low carbon steel, high strength steel, medium carbon steel, low alloy steel.
可焊接材料：低碳钢、强度钢、碳钢、合金钢。
8.
Investigation of Interfacial Modification and Flame Retardancy of Wood Fiber Reinforced Linear Low Density Polyethylene Composite;
木纤维增强线性低密度聚乙烯复合材料界面改性与阻燃的研究
9.
The directional alignment of crystal, on the one hand, effectively controls crack propagation paths and increases strength; on the other hand, induces anisotropy.
云母晶体的定向排列可有效控制裂纹走向，显著提高其强度，也导致材料的各向异性。
10.
Weldable materials: low carbon steel , high-strength steel ,medium-carbon steel, low-alloy steel.
可焊材料：低碳钢、高强度钢、中碳钢，低合金钢。
11.
The System Design of the Electrical Property Measurement for Non-crystal Material
非晶材料电特性测量和温度控制系统的设计
12.
Fabrication of Locally Reinforced Manganese Steel Matrix Composite and Study on Stability of Low Temperature Martensite
局部增强锰钢基复合材料的制备及低温马氏体稳定性研究
13.
Hard, strong metals require a lower cutting speed than soft and ductile materials.
硬度高而强度大的金属要求的切削速度比硬度小而韧性好的材料低。
14.
the more strong the material absorbed radiation is,the bigger the thickness the materials are and the more severe the reduction of the contrast ratio of images are .
材料对射线的吸收越强、材料越厚 ,则图像对比度的降低越明显。
15.
Preparation and Properties of Conductive Composites of Carbon Nanotube/Low Density Polyethylene/Polystyrene;
碳纳米管/低密度聚乙烯/聚苯乙烯导电复合材料的制备及性能研究
16.
Preparation and characterization of LDPE/EGP electrical conducting composites
可膨化石墨/低密度聚乙烯导电复合材料的制备及性能研究
17.
Study on Microstructure and Performances of TiHA FGM with Low Fraction of HA;
低HA含量TiHA梯度材料组织及性能研究
18.
LOW-VELOCITY IMPACT CHARACTERISTICS AND COMPRESSIVE STRENGTH AFTER IMPACT OF PLAIN WOVEN CARBON FIBER REINFORCED SILICON CARBIDE COMPOSITES
平纹编织碳纤维增强碳化硅复合材料低速冲击特性及冲击后的压缩强度(英文)