1.
The solution could be easily and efficiently implemented through improvement on the design of locomotive axle box linkage.
通过改进机车轴箱拉杆设计可以简单有效地实施这一方案。
2.
Install steering damper onto the axle bracket and drag link.
安装转向阻尼器至轴支架和转向拉杆。
3.
Tie Rod End Adjusting Sleeve Nut
转向拉杆端调整轴筒螺栓
4.
CALCULATION OF SHEARING STRESS FOR AXIAL DRAWING OF TRANSFORM SECTION BAR
变截面直杆轴向拉伸时的剪应力计算
5.
The adjustment of rotation angle error of power box twin export axles of twin screw extruder
双螺杆挤压机动力箱双输出轴转角误差调整
6.
Capacity Calculation of Welded Axially Compressed Members with Thin-Walled Box Section
焊接薄壁箱形截面轴心压杆的承载力计算
7.
Modular units for machine tool construction--Spindle noses and adjustable adaptors for multi-spindle heads --Dimensions
GB/T3668.10-1983组合机床通用部件多轴箱主轴端部和可调接杆尺寸
8.
A graduated rod for measuring the depth or amount of liquid in a container, as of oil in a crankcase.
量杆一个测量刻度杆，如曲轴箱中油深度的有刻度的棒
9.
The linkage may consist of a series of interconnected levers and rods, or levers and a cable.
相连部分由一系列相关的拉杆和轴或拉杆和链索所组成。
10.
The track bar connects the rear axle to the frame/body of the vehiclThe track bar is isolated from the body of the vehicle by an isloator bushing located in each end of the track bar.
横拉杆把后轴联结到车框或车体上。横拉杆用一安放在横拉杆两端的隔离衬套与车体隔离开。
11.
Study and Application for Steel Tension Rod of Double Box-beams Rod Structure;
双箱梁下弦钢拉杆施工技术研究与应用
12.
Strut-and-tie model reinforcement of the external prestressed box-beam anchor block
体外预应力箱梁锚固块拉压杆模型法配筋
13.
Aileron servo pull rod should be vertical to the shaft of aileron basically.
副翼舵机拉杆应基本上垂直于副翼转动轴线。
14.
The condition of uniaxial stress is closely approximated in prismatic bars subjected to pure axial tensile.
单轴的应力状态跟棱柱杆承受单纯轴向拉伸十分近似。
15.
Spindle feeds and speeds are controlled by selector levers which engage the proper gears in the drill head.
主轴的进能量和转速是通过选速杆使主轴箱中的适当齿轮相啮合而控制的。
16.
crankcase cam gear bushing
曲轴箱凸轮传动轴衬套
17.
Large span double box-beam rod structure is born out of BSS.
大跨度双箱梁钢棒拉杆组合钢结构即脱胎于张弦梁结构。
18.
The Local Stress Analysis of Continuous PC Box Girder and Strut-and-Tie Design Method;
预应力混凝土连续箱梁局部应力分析及拉—压杆设计