1.
The Shaft Design Scheme and Alignment of Some 110000 Tons Oil Tanker;
某11万吨油轮的轴系布置方案与校中
2.
Decision Support System Based on the Shaft Technological Plan Layout;
轴类零件工艺平面布置决策支持系统的研究
3.
axial power distribution monitoring system
轴向功率分布监测系统
4.
Edification from a Single-shaft Layout of Gas-steam Combined Cycle Power Generators
燃蒸联合循环单轴发电机布置的启发
5.
Research on Layout of Inclined Viscous Damping Brace from Additional Column Axial Force
从附加柱轴力探讨斜置阻尼支撑的布置原则
6.
heating arrangement
加热系统布置供暖系统布置
7.
Research on the H_∞ Control System in the Radial-Axial Magnetic Bearing Biased with Permanent Magnets;
永磁偏置径向轴向磁轴承H_∞控制系统的研究
8.
Design and Realization of Control System for the Radial-Axial Direction Magnetic Bearing of Permanent Magnet;
永磁偏置径向-轴向磁轴承控制系统设计与实现
9.
It is studied the existing three kinds of bearing arrangement for the driving gear shaft of locomotive motor.
研究了现有的3种机车电机主动齿轮轴轴承布置方式。
10.
The trait of the technics technique and equipment consists in the principal axis of grinding head and the axes of workpiece perpendicular disposal.
本工艺和设备的突出特点在于磨头主轴与工件轴线呈垂直布置。
11.
Treatment on oil throw fault in lower guide bearing of generator of Shuibuya Hydropower Plant
水布垭水电站发电机下导轴承甩油问题处置
12.
2-D Numerical Analysis on Influence of In-situ Stress on Tunnel Axis Orientation
地应力对洞室轴线布置影响的二维数值分析
13.
Numerical analysis on proper arrangement of axis azimuth of deep underground cavern groups
深埋地下洞室群轴线方位合理布置的计算分析
14.
Distribution of Mixture Assembled Axial Flow Device
组合式轴流装置稻谷脱出物的分布规律
15.
Post processing system design and realization of simultaneous motion of five axes
五轴联动的后置处理系统设计与实现
16.
Application of CPLD in biaxial position detection system
CPLD在双轴位置检测系统中的应用
17.
bilge pumping arrangement
舱底水泵唧系统布置图
18.
The influence of rotational speed and axial location(six locations) was summarized.
研究了不同转速下不同轴向位置（6个轴向位置）时旋转盘腔内部流场的分布规律。