1.
Design of the crankshaft pulley signal plate dedicated CNC milling machine
曲轴皮带轮信号盘数控铣齿专机设计
2.
crankshaft fan pulley
曲轴上的风扇皮带轮
3.
The job of the timing belt is to turn the camshaft(s) at exactly 1/2 the speed of the crankshaft while maintaining a precise alignment.
正时皮带的工作是:当保持精准定位时调整凸轮轴的运转速度为曲轴速度的一半.
4.
(of a lathe) equipped with gearing for reducing the speed of the spindle from that of the driving pulley.
（指车床）装有齿轮以降低皮带轮的轴杆速度。
5.
crankcase cam gear bushing
曲轴箱凸轮传动轴衬套
6.
Application of Belt Pulley Coupler in Battery Power Lathe
皮带对轮联轴器在蓄电池电机车上的应用
7.
A camshaft driven by a chain or belt turns in the same direction as the crankshaft.
凸轮轴被链或者带驱动，使其朝着曲轴相同的方向转动。
8.
"In Belt drives, pulleys are attached to shafts at their axes, and power is transmitted Between the shafts by means of endless Belts running over the pulleys."
在带传动中,滑轮装在轴上,皮带在各滑轮上不停滑动而在轴间传送能量。
9.
MOTOR PULLEY AND V-BELT
马达皮带轮和v 形皮带
10.
The camshaft rotates in phase with the crankshaft, but at half its speed.
凸轮轴和曲轴协调旋转, 但速度仅是曲轴的一半。
11.
eccentric sheave
偏心内轮偏心皮带轮
12.
When the belts have been located in the belt pulley grooves,moves the drive motor away from the driven shaft so that uniform teensioning of the belts is achieved.
在安装新皮带时，要用手动的方式使电机向驱动轴移动而使所有皮带均处于滑轮槽内。
13.
The handle inputs rotation upon the wheel, then transmitted to another shaft by the belt transmission mechanism.
加上皮带传动机构，手把输入旋转运动于转轮，用皮带传输转动另一个轴。
14.
Certain engines with overhead camshafts have timing belts that have a limited life span.
顶制凸轮轴结构的汽车发动机都配备了正时皮带，并且这个皮带的生命周期是有限的.
15.
Verify Crankshaft—Camshaft Installation—Typical
验证曲轴—凸轮轴安装—典型的
16.
High Speed Grinding with CBN Grit Wheel for Camshaft Manufacturing of Engine
发动机曲轴凸轮轴CBN高速磨削加工
17.
The plain milling machine consists of a boxlike column, which houses the motor and the gears or belt mechanism for driving the spindle and table.
普通铣床有一个箱式立柱（床身），立柱装有电动机和齿轮或皮带轮装置，以驱动主轴和工作台。
18.
coupling with chains or driving belts
链或传动皮带联轴节