1.
Analysis of Impact Load Stress on the Working Process of the Ring Valve of Reciprocating Compressor;
往复式压缩机环状阀工作过程冲击应力分析
2.
System Dsign for Displacement Test of the Ring Valve Based on C++Builder;
基于C++Builder下环状阀片位移检测系统的设计
3.
Do not remove collar bushing with valve under pressure.
在阀门处于压力状态下,不要拆卸轴环。
4.
The circular ring joint bonnet seal has proven to be the best bolted high pressure bonnet joint available.
这种圆形环状连接阀盖密封经过实践证明是目前最好的螺栓高压阀盖连接。
5.
Remove the pressed in relief valve seat and seat O-ring.
拆卸压进去的安全阀阀座和阀座O形环。
6.
exhaust by-pass valve control wire switch
排气旁通阀控制线转环
7.
The sectional drawing illustrates the body cavities surrounding the plug. Circulation is provided from the spaces above and below the plug.
断面图说明环绕阀塞的阀体空穴。从阀塞上方和下方空间提供环流。
8.
In order to gain access to the seat and clapper rubber ring, you must compress the spring (#3) that surrounds the clapper shaft (#1).
为了接近阀座和阀瓣橡胶环，必须压缩环绕阀瓣轴（1号）的弹簧（3号）。
9.
Disc– machined seating surface is mated to seat ring for positive shutoff.
(4) 阀瓣-机加工阀座表面，配置阀座环，实现积极有效的关闭。
10.
Disc– fully body guided for perfect seating in high pressure services.
(11) 阀瓣–全程阀体导向，是阀座更加适用于高压应用环境。
11.
Nickel plated overlay in stem hole for carbon steel valves to combat severe alkylation conditions.
碳钢阀门采用阀杆孔内镀镍层的阀杆，适用于严酷的烃化应用环境。
12.
To replace the seat module, pull the seat module out of the body by gripping at the reinforcement ring.
为了更换阀座模块，抓住加强环，将阀座模块拉出阀体。
13.
Disc ? fully body guided for perfect seating in high pressure services.
阀瓣?全程阀体导向，是阀座更加适用于高压应用环境。
14.
Disc ? machined seating surface is mated to seat ring for positive shutoff.
阀瓣-机加工阀座表面，配置阀座环，实现积极有效的关闭。
15.
Kits include: Disc& Spring assembly, Cover O-ring and lubricant.
组件包括：阀瓣和弹簧总成，阀盖O形环和润滑剂。
16.
An O-ring seals the relief valve body to the main housing.
用一个O形环密封安全阀阀体与主外壳。
17.
The Static Design of Closed-loop System for High-speed Switch Valve Controlled Hydraulic Valve
高速开关阀控换向阀闭环系统的静态设计
18.
The stem position provides indication that valve is opened or closed.
阀杆的高低能够指示阀门处于开启或关闭状态。