1.
Research on the crack growth angles of Ⅰ-Ⅱ-Ⅲ mixed mode crack with photoelastic experiment
Ⅰ-Ⅱ-Ⅲ复合型裂纹开裂角的光弹性试验研究
2.
Propagation and Environmental Propagation of the Indentation Crack of Ferroelectric Materials;
铁电材料压痕裂纹的开裂与环境开裂
3.
initiation of stable crack growth
稳态裂纹扩展的开始
4.
Formation Mechanism and Prevention of Center and Triangle-Zone Cracks in Continuous Cast Slabs
板坯中心裂纹和三角区裂纹的成因与防止
5.
Relationship between stress distribution along slant crack and opening displacement on crack-surface
倾斜裂纹的应力分布与裂纹面开口位移的关系
6.
Cracking analysis on corner-inclusive shearing fractures for rubber vibration-reduction spacers
含角裂纹剪切型橡胶减振垫的断裂分析
7.
High environment humidity increases the susceptibility to hy-drogen induced cracking and stress corrosion cracking.
高湿度能增大氢致裂纹和应力腐蚀开裂倾向。
8.
STUDY OF THE CRITICAL TEMPERATURES FOR DELAYED HYDRIDE CRACKING IN N18 ZIRCONIUM ALLOY
N18锆合金氢致裂纹延迟开裂临界温度研究
9.
Study on Corner Sink and Vertical Cracks of CC Steel Billet
连铸坯角部凹陷及纵向裂纹的研究
10.
Examine block for cracks or fractures.
测试泵体裂纹或破裂。
11.
The crack eventually caused the chord to fracture.
裂纹最终致使弦杆断裂。
12.
To rupture or break open, as a surgical wound.
裂口裂开或破裂，如伤口
13.
Crack propagation usually begins slowly.
裂纹的增长常常是开始缓慢。
14.
CRACKING ANALYSIS OF STAINLESS STEEL BELLOW IN A BLAST FURNACE COOLING SYSTEM
某高炉冷却用不锈钢波纹管开裂分析
15.
Failure Analysis of Cracking of Expansion Joint of Incoloy 800 Bellows
Incoloy 800波纹管膨胀节开裂失效分析
16.
Longitudinal-cracking Failure Analysis of Box
φ139.7mm钻杆内螺纹接头纵向开裂失效分析
17.
Virtual Crack Closure Method Based on Secondary Development of MSC.Patran
虚拟裂纹闭合法在MSC.Patran中的二次开发
18.
Second-developed Program about Crack Growth Simulation and Analysis Based on ABAQUS
基于ABAQUS裂纹自动扩展二次开发及分析