1.
A Study on Crack Tolerance of Coke Tower and Its Life Prediction
焦碳塔的鼓胀、裂纹容限及寿命预测
2.
A Study of Fatigue Crack Growth Rate of TC4-DT Titanium Lloy with Damage Tolerance;
损伤容限型TC4-DT钛合金疲劳裂纹扩展速率研究
3.
Programming Method for Multi-crack Damage Tolerance Analysis of General Structures;
适用于新结构的多裂纹损伤容限分析程序实现方法
4.
Permissible depth of flaw and decarburized layer
裂纹之容许深度及脱碳层
5.
The Finite Element Analysis and Experiment Study on Cracks' Flux Leakage;
裂纹漏磁场的有限元分析与实验研究
6.
Analysis of the Stress on a Half Infinite Cracks with Width
带宽度的半无限传播裂纹的应力分析
7.
CRACK GROWTH LIFE PREDICTION BASED ON FINITE ELEMENT METHOD
基于有限元方法的裂纹扩展寿命预测
8.
Finite Element Analysis of the Crack Tip Field and Structural Evolution Behavior of the Crack Tip;
裂纹尖端场的有限元分析与裂尖结构演化行为
9.
Finite Element Analysis for Surface Cracks in a Finite Elasticity Body;
有限弹性体表面裂纹问题的有限元分析
10.
Finite element simulation of fatigue crack growth of MSD with multiple collinear holes on finite plate
有限板共线多孔MSD疲劳裂纹扩展有限元模拟
11.
Researches on the Calculation Method for the Residual Fatigue Life of Pressure Vessels Containing Many Cracks
多裂纹压力容器剩余疲劳寿命计算方法研究
12.
The endurance crack is apt to be produced in collar thread during drilling, which eventually results in the connection failure.
在钻井过程中,钻铤螺纹容易产生疲劳裂纹,最终导致连接失效。
13.
AN ASYMPTOTIC ANALYSIS OF THE ELASTOSTATIC FIELD WITH FINITE DEFORMATION NEAR THE TIP OF AN INTERFACE-CRACK
界面裂纹尖端有限变形弹性场的渐近分析
14.
ANALYTICAL-VARIATIONAL METHOD OF SOLUTION FOR FINITE MONOLITHIC PLATE WITH HOLE EDGE CRACKS
含孔边裂纹有限大单块板的解析变分解法
15.
Calculation of Stress Strength Factors at Crack Tip of= Fraxinus mandshurica Rupr. by Finite Element
用有限元计算水曲柳裂纹尖端应力强度因子
16.
Finite Element Analysis on Plane Stress Crack Growth in a Power-Law Hardening Material
幂硬化材料扩展裂纹的有限元分析(英文)
17.
Residual Ultimate Strength Analyses of Cracked Ship Structures;
具有裂纹损伤的船舶结构剩余极限强度分析
18.
Elastic-Plastic Finite Element Analysis for Circumferential Part-Throughwall Cracks on Mitered Elbow;
斜接弯管环向内表面裂纹弹塑性有限元分析