1.
The design methods are expounded of equalizing horizontal and balancing deadweight for the jib-bridge system.
阐述了对臂桥架变幅系统的水平位移补偿、臂桥架自重平衡的设计方法。
2.
Movement Analysis and Dynamic Simulation on Luffing System of Jib-bridge Quayside Container Crane;
臂桥架变幅系统的运动分析与动态仿真
3.
Research on Design Rules and Methods of the Jib-Bridge Luffing System;
臂桥架变幅系统设计准则和方法的研究
4.
Optimization Design for Luffing Mechanism of the Brachial-Bridge Portal Container Crane;
臂桥架集装箱起重机变幅机构优化设计
5.
Mechanics Properties Analysis on the Metal Structure of Jib-bridge Luffing Gear;
臂桥架变幅系统金属结构力学性能分析
6.
A new-type quayside container crane with jib-bridge luffing system as the main working part is brought out.
提出一种以臂桥架变幅系统为主要工作机构的岸边集装箱起重机。
7.
Most cantilever bridges have two arms of truss structure that meet or support a section between them.
大多数悬臂桥都有两个桁架臂用以对接或支撑两臂之间的桥段。
8.
constructed of two cantilevers that meet in the middle.
悬臂自支架伸出，彼此相接而筑成的桥。
9.
Front axle Type Double arm independent suspensio
前桥型式双横臂独立悬架
10.
Finite Element Analysis of the Arm Bridge-erecting Machine JQ140G;
JQ140G架桥机机臂有限元分析
11.
Research on Cast-in-Place Cantilever Construction Technology of Cable-Stayed Truss Bridge
斜拉桁架桥的悬臂浇注施工工艺研究
12.
Cantilevers enabled bridge builders to span longer distances than truss bridges. During the nineteenth century, cantilevers were frequently used to build railroad bridges.
悬臂桥使得桥梁建筑师能够修比桁架跨度更大的桥梁。在19世纪悬臂桥常常是铁路桥。
13.
Study on the Arm Structure and Hydraulic System of Intelligent Bridge_detection Vehicle;
智能桥梁检测车臂架结构及液压系统的研究
14.
The Design and Research on Independent Suspension Drive Axle with a Single Trailing Arm and Two Transversal Torsion Bars;
单纵臂横扭杆独立悬架驱动桥设计研究
15.
On Cast-in-situ Cantilever Cradle Construction Controlling of Wuxing Bridge,Changzhou Viaduct
常州高架五星大桥挂篮悬臂现浇施工控制
16.
Construction Techniques of Cable-stayed Cantilever Truss Beam
小溪塔大桥斜拉悬臂桁架梁施工技术要点
17.
Simulation analysis of bridge inspection truck boom based on ADAMS and ANSYS
基于ADAMS和ANSYS的桥梁检测车臂架结构的研究
18.
Research on Optimum Structural Design of the Arm of Meter-Railway Bridge Girder Erection Machine
铁路米轨架桥机机臂结构优化设计研究