1.
For this big-end bearing, steel-backed lead or tin shell bearings are used.
对连杆大头轴承来说，使用的是铅的钢背或锡的轴瓦式轴承。
2.
The main bearing journals fit into the cylinder block and the big end journals align with the connecting rods.
主要轴承曲颈安装在气缸体和与连杆大头末端匹配的曲颈上。
3.
The crank end of the connecting rod is sometimes called the rod "big end".
连杆的曲轴有时称为“大头”。
4.
feeder drive link bearing
进料器的传动连杆轴承
5.
connecting rod bearing pouring
连杆轴承巴氏合金浇注
6.
The rolls are mounted with dual heavy-duty bearings on each shaft and resting in machined bearing blocks.
辊经由双重坚固的轴承连杆置于轴承套中。
7.
Structure Optimization for Hydrostatic Supporting Bush of Crank Shaft and Rod Type Hydraulic Motor
曲轴连杆式液压马达静压支承连杆瓦结构优化
8.
Stem bearing to assure concentric stem rotation, allowing stem packing to provide maximum sealing effectiveness.
阀杆轴承保证同轴阀杆的旋转，使得阀杆填料具有最大的密封效果。
9.
Lift the ram and position the tappet (with the ball bearing) inside the tester cup.
举起压头，在测试杯中定位挺杆（带滚珠轴承）。
10.
"The connecting rod carries the power thrusts from the piston to the crankpin. At the same time, the rod is in eccentric motion."
"连杆的作用是将活塞承受的压力传给连杆轴颈。同时,连杆做偏心运动。"
11.
The bearing shells must be installed so that the tangs are in the machined grooves in the rods and caps.
安装轴瓦时，应使凸舌位于连杆和轴承盖的加工槽内。
12.
Disconnect stabilizer bar links at the axle.
断开车轴上稳定杆连杆。
13.
Powder Metallurgy Forging and Cleavaging Technics for Conn-Rod
连杆粉末冶金锻造与连杆大头劈裂技术
14.
"On many engines, the connection-rod and main bearings (crankshaft bearings) can be checked for wear with an oil-leak detector before the engine is torn down."
许多发动机在拆卸之前,可以用漏油检测装置检查连杆和主轴承(曲轴轴承)的磨损情况。
15.
The rod-bearing cap attaches the connecting rod to the crankpin.
连杆轴瓦盖将连杆安装到曲轴销上。
16.
The throw of the crankshaft, i.e. the distance between the main journal and the big end centers, controls the length of the stroke.
曲轴的摆幅，即在主要曲颈和连杆大头末端中心之间的距离，控制着冲程的行程。
17.
The deformation matrix method is a fast and available method to calculate surface deformation of connecting rod bearing bore.
变形(柔度)矩阵法计算连杆轴承孔表面变形快速、有效；
18.
Research on Camshaft Connecting- Rod Type Low Speed High Torque Hydraulic Motors with High- Pressure Rank;
曲轴连杆式低速大扭矩液压马达的高压化研究