1.
LIMIT STRENGTH OF LIPPED H-SECTION MEMBERS UNDER BOTH COMPRESSION AND BENDING
卷边翼缘工形构件在压弯荷载作用下的稳定承载力设计理论
2.
RESEARCH ON IN-PLANE STABILITY BEARING CAPACITY OF LIPPED H-SECTION TAPERED MEMBERS UNDER COMPRESSION AND BENDING
卷边翼缘工形变截面构件在压弯荷载作用下平面内稳定承载性能研究
3.
The smallest load capable of maintaining the bar in a slightly bent form is called the critical or bucking load.
使杆保持稍微弯曲形状的最小载荷称为临界载荷或临界压曲载荷。
4.
The Calculatiou of critical load by torsion angle-bending moment matix;
用转角弯矩矩阵确定压杆的临界荷载
5.
Ratcheting Study of Pressurized Elbows Subjected to Reversed In-plane Bending
内压弯管在面内循环弯曲载荷作用下棘轮效应的研究
6.
By thisequation, the bending problem and buckling load of a circular plate were discussed.
利用它对弯曲问题进行分析,并求得了圆板的压屈临界载荷。
7.
Analysis and Experiments on the Plastic Limit Load of Elb ows with Local Thinned Area under Internal Pressure
内压作用下局部减薄弯管塑性极限载荷分析与试验研究
8.
Linear and Non-linear Analysis of Composite Laminated Box Beams under Pressing, Bending and Torsional Loads;
复合材料层合箱梁在压、弯、扭荷载作用下的线性及非线性分析
9.
Study of plastic limit load of the combined fittings of double elbows under in-plane bending moment
面内弯矩下双弯头组合管件的极限载荷研究
10.
IDENTIFICATION OF BENDING MOMENT LOADINGS RESULTING IN CRACK DAMAGE OF CLUTCH CASE
导致离合器壳体破裂的弯矩载荷识别
11.
The Generalized Rigid-jointed Beam Method for Calculating Lateral Distribution of Load in Curved Bridges
广义刚接梁法计算弯桥荷载横向分布
12.
Bending Calculation of Bimodulous Circular Plate under Concentrated Loads
集中载荷作用下双模量圆板弯曲计算
13.
joint contact surface
连接接触面总压紧载荷
14.
Cold-Formed Steel Unlipped Channels Subjected to Concentrated Bearing Load;
冷弯薄壁非卷边槽钢承受集中荷载时的承载力
15.
Experimental investigation on the span loading in compound lean compressor cascades with slots air injection
高负荷缝隙弯曲扩压叶栅展向负荷实验
16.
Analysis of Estimating Ultimate Loading and Static Test of Screw Pile Under Inclined Loading
承压螺旋桩斜向荷载试验与极限荷载判定分析
17.
BENDING OF CIRCULAR AND RING-SHAPED ELASTIC THIN PLATE UNDER ARBITRARY LATERAL LOAD
任意横向载荷下弹性圆形及圆环形薄板的弯曲
18.
Bending and Torsion problems of Non-homogeous Elastic Circular Ring with Variable Cross-Section under
载荷垂直于非均匀变截面弹性园环的弯扭问题