1.
Thus a normal loom has two shafts. The main shaft(crankshaft or top shaft) drives the lay mechanism and is geared to another shaft which operates at half of the speed of the crankshaft.
这样,普通织机应具备两根轴,主轴(曲拐轴或位于上部的轴)驱动筘座并通过齿轮驱动另一根轴。
2.
Analysis of Inspection and Measuring Method for 120° Distributing Angle Errors of Crankshaft Crankpins
曲轴曲拐120°角度误差检测方法分析
3.
Research on the Upset Forging Technology of Marine Crank of 305 Crankshaft
船用305曲轴曲拐镦锻成形工艺研究
4.
Research on a Newly Combinational Tri-turned Crankshaft for Diaphragm Pump
新型组合式隔膜泵用三拐曲轴的研究
5.
Analysis on Measuring Accuracy in Inspecting Crank Angles for Six-cylinder Crankshafts
六缸发动机曲轴曲拐夹角检测方法的精度分析
6.
Study on Heat Transfer Performance of Parallel Axis Rotating Heat-Pipe with Corner;
拐角式平行轴旋转热管传热性能的研究
7.
Study on Making Process and Mould Structure of None-phase Angle Crankshaft with Four Cylinder Sleeve
无相位角四拐曲轴的制坯工艺及模具结构优化
8.
triple-barrel pump
三联式筒泵(三个泵筒与一个吸液管相连，由三拐曲轴驱动三个活塞产生均匀液流)
9.
and take the third turning on the left.
在第三个拐弯处向左拐，
10.
Turn the second corner to the left .
在第二个拐角处向左拐。
11.
Take the second turn to the leave.
在第二个拐弯处向左拐。
12.
and then take the first turn on the left
在第一个拐弯处往右拐
13.
Turn the first corner to the right .
在第一个拐角处向右拐。
14.
around the bush
ph.1. 拐弯抹角
15.
Shaft Assembly (Male, female, washer, grease….
轴组件（轴，轴套，轴承，油脂。。。）
16.
He went away, limping dot and go one.
他一拐一拐地跛着走开了。
17.
After you pass the information desk make the first turn to the left.
过了询问台，在第一个拐弯处向左拐。
18.
In the fall, Wilma limped off to school.
到了秋天，威尔玛一拐一拐地上学去了。