1.
Meanwhile, the springback potential energy principle is applied to calculate the springback deformation of a pure bending of curved beam.
同时，应用该回弹势能原理于纯弯曲梁的回弹变形计算。
2.
Test study on rebound deformation of foundation after unloading by vacuum preloading
真空预压卸载后地基回弹变形的试验研究
3.
Study of Springback for Design of the Tool in Big Sheet Metal Forming;
大型板材弯曲模具设计中补偿弯曲回弹变形的研究
4.
Forming Principle and Control of Spring-back Distortion in Sheet Stamping for Z-Rail
Z形梁冲压回弹畸变的形成机理研究及控制
5.
Springback Calculation of Multi-angle Panel during Bending
U形件多角拉弯成形时的应变及其对回弹影响
6.
Plastic deformation and creep are highly undesirable, resilience is favourable.
塑性形变和蠕变是很不利的，回弹性则是有利的。
7.
Numerical Simulation Research of Variable Blank-Holder Force in Control of Springback Based on Dynaform;
基于Dynaform板材成形回弹控制的变压边力研究
8.
Technology of Reducing Distorted Rebound of Sheet Shaping Die dring Temper
减少薄板成型模回火时变形反弹的工艺
9.
An elastic body tends to return to its original shape and size as soon as the deformating force is removed.
弹性物体一旦使之形变的力撤去，趋向于回到原来的形状和大
10.
Returning to or capable of returning to an initial form or state after deformation.
弹回的在形变以后恢复或能够恢复原来形状或状态的
11.
The plastic deformation on ribs caused by punch push down and skin springback.
筋条的塑性变形既有凸模下压导致的塑性变形,又有蒙皮回弹导致的塑性变形;
12.
Surface Deformation and Elasticity Recovery of PBXs and Coats
高聚物粘结炸药及涂层表面抗变形与回弹性研究
13.
Heat setting gives cloth resistance to wrinkling during wear and the ease- of- care properties that may be attributed to improvements in resiliency and elasticity.
经过热定形的织物在使用时能够抗折皱,可以免烫,其原因是纤维的回弹性和弹性的改变。
14.
E、 The natural emulsion pillow adopts special Talalay technology to froth and form, so it has structural durabilities and strong reslilience characteristics, and its shape can keep long and not changed.
E、采用塔拉雷特殊工艺发泡而形成的天然乳胶枕，经久耐用，回弹力强，形状保持长久不变形.
15.
COMBINED CALCULATION OF DEFORMATION AND STRESS FOR THE BODY AND THE SABOT OF AN APFSDS
联合计算穿甲弹弹体与弹托的应力及变形
16.
Upon unloading at any state in the deformation, the strain does not retrace the loading curve but is reduced along an elastic unloading line.
在变形的任一阶段卸载时，应变都不按加载曲线返回，而是沿着弹性卸载曲线下降。
17.
The formulae for calculating the bend radius of neutral plane and the decrement of bend angle after springback were derived by considering the deformation after unloading.
依据卸载变形的分析计算，推导出回弹后中性层弯曲半径及弯曲角变化量的计算公式。
18.
Quantitative Analysis on the Principle of Hot Shape Correction of Plate Spring under Bending and Unbound;
钢板弹簧弯曲回弹热校形规律的定量分析