1.
Features of displacement at the top of enclosure piles and analysis of the stiffness formula of bracing system
围护桩顶部位移特征及内支撑刚度公式辨异
2.
The load, radial stiffness, axial stiffness and angular stiffness of precision spindle were formulated.
推导出精密主轴承载、向刚度、向刚度和角刚度的计算公式。
3.
Approximate Formulae for Initial Junction Stiffness of Bag Filter
袋式除尘器节点初始刚度的近似计算公式
4.
CALCULATING FORMULAS FOR EQUIVALENT STIFFNESS AND STABILITY OF CURVED BAR SIMPLY SUPPORTED AT BOTH ENDS
两端简支弯曲杆件的等效刚度、稳定性计算公式
5.
The element stiffness matrix and the equivalent nodalloads are derived, and the formulas for calculating internal forces and disp-lacements under three typical loads are given.
推导了单元刚度矩阵、等效结点荷载,并给出在等刚度段内三种典型荷载下的计算公式。
6.
Stiffness Matrix and Equivalent Node Load Formulae or Varying Cross-section Spatial Beam Elements;
变截面空间梁单元刚度矩阵及等效结点荷载公式
7.
Parametrical analysis and design formulas for out-of-plane bending rigidity of CHS X-joints
单层网壳X型圆管节点平面外抗弯刚度的参数分析与计算公式
8.
The element siiffness matrix and the geometric stiffness matrix etc. are explicitly presented.
单元的刚度矩阵和几何刚度矩阵全部显式给出。
9.
This is of course all very strenuous work and no sooner has she completed it all than the Third Princess dies of overwork.
三公主刚刚安排好这些，终因劳累过度，就去世了。
10.
Cantilever method
悬臂式测定法,刚软度测定法《试》（织物刚性试验）
11.
On Stiffness of Rigid Mainshafi on Vertical Combination Four-spindle Boring Mill;
立式组合四轴镗床刚性主轴刚度的探讨
12.
calibration equation
校准公式，分度公式
13.
NaCl. In solving these problems you must apply the formulas you have just learned.
你必须运用刚学的公式来解这些问题。
14.
Derivation of the restitution coefficient formula for plane-parallel motion rigid body
平面运动刚体的恢复系数公式的推导
15.
heavy-rigidity gear hobbing machine with movable worktable
工作台移动式高刚度滚齿机
16.
Transposition of Two Vector Expressions for Rigid-body Angular Velocity
刚体角速度两种矢量表达式的互通性
17.
Research on Rational Track Stiffness of Slab Track on the Subgrade
土质路基板式无砟轨道合理刚度研究
18.
STUDY ON STIFFNESS CONTRIBUTION OF SEPARATE TYPE BODY TO WHOLE FRAME-BODY STRUCTURE
非承载式车身对整车刚度贡献率研究