1.
Experimental Investigation of Thick Sheet Fine-blanking Technical Parameters and Numerical Simulation;
厚板精冲工艺参数试验研究及有限元分析
2.
Coupled Thermal-mechanical Analysis of Plastic Shear Zone and Die Damage in Thick Plate Fine Blanking Process
厚板精冲塑性剪切带热力耦合分析与模具失效
3.
Development and Application of High Accuracy Gauge Control for Plate Mill
中厚板高精度厚度控制的研究与应用
4.
Study on Nonlinear Punching Shear Damage Process Imitation of Thick Raft Foundation;
厚板筏基础非线性冲切损伤过程模拟
5.
Mechanism of Small Hole Punching on Thick Blank and Study on Die Life-span;
厚钢板小孔冲裁机理及模具失效研究
6.
Study on Improving the Low-temperature Impact Toughness of 3.5% Nickel Heavy Plate
提高3.5Ni厚钢板低温冲击韧性的研究
7.
Analysis and Improvement of Thickness Precision Controlling for Automotive Sheet
汽车板产品厚度精度控制分析与改善
8.
Here, it flows over boards thickly coated with grease.
在冲洗桌上，压碎的岩石从涂着厚厚油脂的板子上流过。
9.
Finite Element Simulation for Blanking Process of Thick Sheet Metal and Optimize Parameter;
厚板冲裁过程的模拟仿真及其参数优化
10.
Cause Analysis of Unqualified Low Temperature Toughness of Q345E Heavy Plate
Q345E厚板低温冲击性能不合原因分析与对策
11.
The Study on the Impact Toughness Test of the Thick Steel Plate SA387Gr11CL2 Welded Joint
厚壁钢板SA387Gr11CL2焊接接头冲击韧性试验研究
12.
Effects of simulated PWHT on impact properties of 12Cr2Mo1R steel heavy plate
模拟焊后热处理对12Cr2Mo1R厚钢板冲击性能的影响
13.
The Study of the Frror Caused by Vibration in High-accuracy Laser Measurement Instrument for Thickness of Plate;
高精度激光板厚测量仪的振动误差研究
14.
Analysis of Thickness Precision and Improvement of Controlling Model for Cold Rolled Automobile Sheet
冷轧汽车板产品厚度精度分析及控制模型改善
15.
Prediction of the medium plate rolling force with comprehensive model
中厚板精轧机轧制力预报综合模型研究
16.
Fabrication of Thick Metal Micromesh Sieves with High Open Area Using the UV-LIGA Process
UV-LIGA技术制备大厚度高开孔率精细金属网板
17.
Analysis of fine blanking and numerical simulation of process for spanner of hold down plate
压脚板扳手精冲工艺分析与数值模拟
18.
The Procedure and Mechanics Research of Precision Blanking Deformation of Thin Sheet Metal
薄板精密冲裁的变形过程和机理研究