1.
ABAQUS-based Finite Element Analysis on Basic Dimensional Effect on Loess Foundation Settlement under Strip Load
基于ABAQUS的条形荷载下黄土地基沉降基础尺寸效应的有限元分析
2.
Constitutive Relation of Pear-shaped Yield Surface for Concrete under the Conditions of the Special Load
特殊荷载条件下的混凝土梨形屈服面本构关系
3.
APPROXIMATE SOLUTION OF SEISMIC BEARING CAPACITY OF STRIP FOUNDATION
地震荷载作用下条形基础地基动承载力的近似解
4.
B-Spline Function Method for the Problem of the Large Deflection of Circular Plate Subjected to Axisymmetrical Distributed Load;
轴对称荷载作用下环形薄板大挠度样条函数解法
5.
The smallest load capable of maintaining the bar in a slightly bent form is called the critical or bucking load.
使杆保持稍微弯曲形状的最小载荷称为临界载荷或临界压曲载荷。
6.
Loading Conditions. The selection of loading conditions follows the determination of the type and magnitude of the loads that act on the structure.
荷载条件。确定了作用在结构上的荷载类型大小之后，接着要选择荷载条件。
7.
Cracks may initiate in compression, and certainly in tension.
裂缝可能在压缩载荷下形成，当然也可能在拉伸载荷下形成。
8.
Technical code for environmental conditions and load in beach-shallow sea
滩海环境条件与荷载技术规范
9.
Evaluation on the Reliability of the Underground Structure under Complicated Load;
复杂荷载条件地下结构的可靠性评价
10.
Study on Heat Capacity of Transmission Lines Being Operated;
运行条件下输电线路热载荷能力研究
11.
The Stress Computation of FAE Charge under Condition of Impact Loading
冲击载荷条件下FAE装药的应力计算
12.
Combined footings are those in which the pads would also be so large that they nearly touch, but unlike strip footings, they may carry the load from more than one row of columns.
复式基础的基座也会大得几乎彼此相连，但与条形基础不同，它可以承受一排以上柱子的荷载。
13.
Ultimate load designs according to the yield-line or strip methods do not guarantee safety against cracking or excessive deformation.
接屈服线法或条带法的极限荷载设计不能完全保证抗裂或防止过度变形。
14.
The ultimate load of plate girders was analyzed by spline finite strip and plastic hinge method.
用样条有限条塑性铰法分析了板梁的极限荷载。
15.
Find the angular deformation sustained with such loading.
求在这种载荷下出现的角变形。
16.
How do engineering materials deform when bearing mechanical loads?
如何做工程材料变形时，轴承机械载荷？
17.
A COUPLED ELEMENT ANALYSIS OF WAVE LOAD ON BODY WITH ARBITRARY SHAPE
任意形状物体波浪载荷的耦合元分析
18.
On the deformation of soft clay subjected to cyclic loading
循环荷载作用下软黏土变形特性研究