1.
A Study on Characteristics of Air Static Pressure Thrust Bearing with Variable-Section Pressure Equalizing Groove
具有可变均压槽的气体静压推力轴承性能研究
2.
The Flow Distribution Analysis of Spool’s Different Pressure Slots Based on FLUENT
基于FLUENT的阀芯不同均压槽流场分析
3.
Effect of pocket size on the aerostatic bearing static capabilities
均压槽尺寸对空气静压导轨静态性能的影响
4.
All these factors can cause a condition of unbalanced stresses with resultant distortion.
这些因素可导致压力不均，从而造成部件畸变。
5.
The Homogeneous Charge Compression Ignition Technology for Engine Based on Variable Control
基于可变控制的车辆发动机均质压燃技术
6.
Research on Fatigue Failure of Reverse Vaulted and Notched Thin Metallic Shell under Uniform Pressure;
均匀压力下反拱带槽金属薄壳的疲劳特性研究
7.
An Analysis of Mechanical Property of Elastic Pressure Groove on Air Radial Bearing
气体径向轴承弹性均压槽力学性能分析
8.
Study on elastic distortional buckling of lipped channel beam-columns
卷边槽钢压弯构件弹性畸变屈曲研究
9.
Changes in lifestyle, irregular eating hours and work-related stress could all cause hair loss.
生活习惯改变、无定时及工作压力均可能导致脱发。
10.
The Implement of HCCI on Gasoline-fueled Engine with Variable Control Technology;
基于可变控制技术的均质压燃（HCCI）在汽油机上的实现
11.
Standard transformer can only operate at the rating capacity without the cooling fan, while each transformer may be installed with an extra cooling fan to increase the output capacity.
每台产品上均可加装风机增大变压器容量输出，不装风机的变压器能在额定容量下连续运行。
12.
Research on Voltage Balancing of Series Connection of IGBTs in a 10kV High Voltage Frequency Converter;
10kV高压变频器中IGBT串联均压的研究
13.
Analysis of Distortional Buckling of Cold-formed Thin-walled Lipped Channel Column;
冷弯薄壁卷边槽钢受压畸变屈曲性能分析
14.
Theoretical Research of Groove Deformation Zone of Wide Copper Strip Continuous Extrusion;
宽铜带连续挤压轮槽变形区的理论研究
15.
Both systolic and diastolic pressures are recorded.
收缩压和舒张压均可记录下来。
16.
average comparable variance
平均可比较的变异性
17.
If grooves are cut in the flank of nut hydrostatic action is possible.
如在螺母螺纹侧面切槽，则可实现静压作用。
18.
Fixed cistern barometers are used as a standard for checking altimeter.
固定槽式气压计可以作为标准件去检验测高计。