1.
Characteristics Studies on Circulating Fluidized Bed Boiler's Loop Seal Components
循环流化床锅炉“J”型回料阀特性研究
2.
Research on Characteristics of Gas-Solid Flow in Air Nozzle Area in the Furnace and U-Valve in CFB Boiler
CFB炉膛风帽区域与回料阀内两相流动特性的研究
3.
The check valve seats shall be of molded thermoplastic construction.
止回阀阀座应该是模制热塑塑料结构。
4.
Check valve guiding shall be plastic to plastic.
止回阀引导装置应该是塑料对塑料。
5.
Check Valve 1;Check Valve 2;Check Valve 3;Screw-down
止回阀 1;止回阀 2;止回阀 3;旋拧阀
6.
Type of valve- gate, globe, check, etc.
阀门种类：闸阀，截止阀，止回阀，蝶阀，球阀，等等。
7.
This is a gate valve (check valve, butterfly valve, cut-off valve, magnetic valve, remote valve, relief valve, throttle valve, cock).
这是一个闸阀（止回阀、蝶阀、切断阀、电磁阀、遥控阀、安全阀、节流阀、旋塞）。
8.
"Valve Body, Cover, Tailpiece and Control Stop shall be in conformance with aSTM alloy Classification for Semi-Red Brass."
阀体、阀盖、附属件和控制止回阀均符合美国材料试验协会aSTM的半红铜合金分类标准。
9.
dual way check valve
双向止回阀（双通单向阀）
10.
check-valve mounting bracket
止回阀(装置)托架
11.
The check valve poppet assembly shall be guided via the use of a corrosion resistant plastic guide.
止回阀的提升架总成应该通过耐腐蚀塑料导轨引导。
12.
The check valves shall be of thermoplastic construction with stainless steel hinge pins, cam arm, and cam bearing.
止回阀应该是热塑塑料结构，配置不锈钢铰链销、轮臂和凸轮轴承。
13.
Now bring the check assembly through the check retaining wall.
现在将止回阀通过止回阀护壁取出。
14.
MATERIAL AND SERVICE– Cast steel bolted bonnet valves are available in a variety of body/ bonnet materials and trims.
材料和应用–铸钢螺栓阀盖阀门可配置多种阀体/盖材料和阀内件。
15.
When discharging, the motor operates, hydraulic cylinder charges pressure, push rod (piston rod) draw back, the valve plate connected with push rod opens, the materials are discharged.
当需要卸料时，电机运转，液压缸增压，推杆（活塞杆）收回，和推杆连接的阀板开启，物料卸下。
16.
General purpose industrial valves-Casting iron globe valves and lift check valves
GB/T12233-1989通用阀门铁制截止阀与升降式止回阀
17.
The check valve and relief valve seats shall be push-in type.
这种止回阀和安全阀阀座应该是推入式的。
18.
Seat discs shall be reversible to extend check valve life.
阀座阀瓣应该是双向的，能够延长止回阀寿命。