1.
Microstructure Control of Hot Rolled C-Si-Mn TRIP Steel Based on Dynamic Transformation of Undercooled Austenite
基于动态相变的C-Si-Mn系热轧相变诱导塑性钢
2.
Strain Hardening Exponent Calculating Model for Transformation Induced Plasticity Steels
相变诱发塑性钢的应变硬化指数计算模型
3.
Microstructure and Properties of 800 MPa Cold Rolled TRIP Steel
800MPa级冷轧相变诱发塑性钢的组织与性能
4.
Effect of Annealing in Two-phase Region on Microstructure and Mechanical Properties of TRIP Steels
两相区退火对相变诱发塑性钢显微组织与力学性能的影响
5.
Study on the Microstructure and Properties of Low Carbon Low Silicon TRIP Steel Containing Vanadium;
含钒低碳低硅相变诱发塑性钢的组织和性能的研究
6.
Upper Limit Temperature of Deformation Induced Transformation of Nb Microalloyed Steels
铌微合金钢形变诱导相变的上限温度
7.
Study on the Strain Induced Transformation of Cr-Mo Steels;
Cr-Mo低合金钢形变诱导相变规律研究
8.
Influence of Deformation Rate on Strain-Induced Phase Transition of 2205 Duplex Stainless Steel
变形速率对2205双相不锈钢形变诱导相变的影响
9.
Microstructure and Mechanical Properties of Fe24Mn0.5C TWIP Steel
Fe24Mn0.5C形变孪晶诱发塑性钢的显微组织和力学性能
10.
Effects of deformation parameters on deformation induced ferrite transformation in plain carbon steel
形变参数对低碳钢形变诱导相变的影响
11.
Effect of Strain Rate on Deformation Induced Ferrite Transformation of Q235 Steel
应变速率对Q235钢形变诱导铁素体相变的影响
12.
Influence of Cooling Rate on Microstructure Evolution Due to Deformation Induced Ferrite Transformation in Vanadium Microalloyed Steel
冷速对钒微合金化钢形变诱导相变组织的影响
13.
Discussion on the Strain Induced Transformation during Hot Deformation Process of 2205 Duplex Stainless Steel
2205双相不锈钢热变形过程中形变诱导相变的探讨
14.
Effect of Deformation and Holding Time after Deformation on Inverse Transformation of Deformation Induced Ferrite in Q235 Steel
变形量和变形后保温时间对Q235钢形变诱导铁素体逆相变的影响
15.
FATIGUE PROPERTIES OF LOW CARBON LOW SILICON TRIP STEEL
相变塑性钢的低周疲劳性能和裂纹扩展速率
16.
STRAIN-INDUCED MARTENSITIC TRANSFORMATION IN 304L AUSTENITIC STAINLESS STEEL UNDER ECAP DEFORMATION
ECAP变形下304L奥氏体不锈钢的形变诱导马氏体相变
17.
Study on New High Strength and Super High Strength TRIP Steels;
高强度和超高强度相变塑性钢的开发和研究
18.
A study on plastic deformation and fracture of hot rolled dual-phase steel
热轧双相钢塑性变形和断裂行为的研究