1.
Progress of the Study on Shear Strength Estimation-method of Rock Joints;
岩体结构面抗剪强度估算方法研究进展
2.
The analysis of the shearing strength's weakening action of water on the rock's structure
水对岩体结构面抗剪强度弱化作用分析
3.
Study on Shear Strength Estimate-Method of Rock Joints Applied in Engineering;
岩体结构面抗剪强度经验估算方法的工程应用研究
4.
Study on Shear Strength Estimate-Method of Rock Joints Based on Experimental Comparison;
岩体结构面抗剪强度经验估算方法的试验对比研究
5.
Study on Shear Strengths of Rock Structure Planes in Different Shearing Direction by Simulation Experiment
岩体结构面不同剪切方向的抗剪强度模拟试验研究
6.
Study on application of earthquake-resistant and shear-resistant strength theory of stone structure
石砌体结构抗震抗剪强度理论的应用
7.
Experimental study on shear bonding strength of textile reinforced concrete (TRC) for strengthening
TRC加固构件抗剪粘结强度试验研究
8.
Experimental Study on Structural Strength and Shear Strength of the Unsaturated Loess;
非饱和黄土结构强度与抗剪强度的试验研究
9.
Effect of sandblasting on shear bond strength between rebonded metal brackets and enamel
喷砂处理对脱落托槽与牙面粘结的抗剪切强度
10.
The General Shear Strength and Slip Surface Position of Geotechnical Space
岩土空间面上抗剪强度与滑动面位置
11.
Fractal Description on Shear Strength of Cement Face of Rock-Concrete and Its Engineering Application;
岩石—砼两相介质胶结面抗剪强度分形描述及其工程应用
12.
Shear Strength Behavior of Over-consolidation Clay in Ring Shear Tests;
利用环剪仪对超固结黏土抗剪强度特性的研究
13.
Shear strength behavior of overconsolidated clay in ring shear tests
采用环剪仪对超固结黏土抗剪强度特性的研究
14.
The Effect of Shear-wave Velocity on the Structure and the Liquefaction Resistance of Saturated Loose Sands (Silts);
剪切波速对饱和松散砂（粉）土结构性及抗液化强度影响的研究
15.
The investigation of shear strength of partly consolidated clay
未完全固结软粘土抗剪强度试验研究
16.
Optimal Analysis for Lateral Stiffness in Mid-highriseRC Frame Shearwall Structure with Special-shaped Columns;
中高层异形柱框剪结构抗侧刚度优化
17.
Layout of Multi-tall Frame-shear Structure Lateral Stiffness on Anti-shear-torsion Characteristic Effect;
多高层框架—剪力墙结构抗侧力构件平面布置对抗剪扭性能的影响
18.
Study for New Structure Design of Warship Resisting Damage and Residual Strength;
水面舰艇新型抗损结构设计与剩余强度研究