1.
Theoretical Analysis of Slip and Deflection of Composite Beams Taking into Account Longitudinal Shear Force Redistribution Effect
考虑纵向剪力重分布影响时组合梁界面滑移及挠度变形的理论分析
2.
The Field Pull-out Tests and Computation of Distribution of Shearing Force of Pressure-type Anchor;
压力型锚杆现场试验及剪力分布计算
3.
The shear stress in interver tebral disc mainly distributed in fibrous rings.
②椎间盘的剪切应力主要分布在纤维环。
4.
Stud shear distribution in composite curved beam with open section
开口组合曲梁焊钉剪力分布规律研究
5.
Study on Shearing Stress Distribution of Anchored Section for Prestressed Anchor Bolts
预应力锚杆锚固段剪应力分布规律研究
6.
Research on Distributing Regularity of Shear Yielding Area in Asphalt Pavement under Heavy Axle Load
重载交通沥青路面剪切屈服区分布规律研究
7.
Shearing Strength Distribution and Mass Transfer Enhancement of Vortex Wave Membrane Bioreactor;
涡旋波膜生物反应器的剪应力分布及传质强化
8.
Research of Experiment and Numerical Simulation on body Surface Shear Distribution of Sitting Posture
坐姿人体体表剪力分布实验与数值模拟
9.
About Rational Collocation Principles of Shear Wall in Frame-shearwall Structure;
框剪结构体系中剪力墙合理布置原则
10.
Nonlinear Finite Element Analysis and Regularity Distribution Study of Internal Force on Short-shear Wall Structure System;
短肢剪力墙结构体系非线性有限元分析和内力分布规律的研究
11.
ANSYS Analysis and Regularity Distribution Study of Internal Force on Short-shear Wall Structure System;
短肢剪力墙结构体系ANSYS分析和内力分布规律的研究
12.
The stress distribution and shear lag coefficients can be concluded from the results of finite element calculation.
由模型计算可得到沿桥纵向的应力分布,求得剪力滞系数。
13.
Research on Static Behavior and Seismic Performance of Orthogonal Grid Beamplate Transfer Structure Supporting Bias Shear Wall
正交梁板转换结构承托斜布剪力墙的受力机理和抗震分析
14.
Internal Forces Redistribution and Stresses Redistribution Analysis of Continuous and Prestressed Concrete Girder Bridges
预应力混凝土连续组合梁桥的内力重分布与应力重分布分析
15.
Influence of Contact Pressure Distribution of Amphibious Tracklayer to Adhesive Force under NonLinear Cutting Model
非线性剪切模型下履带车辆接地比压分布对附着力的影响
16.
Study on the Flow-Field Distribution and the Dynamic Characteristics of the Rotor System in the Shear Homogenizer;
剪切式均质机内流场分布及其转子系统动力学特性的研究
17.
Finite Element Analysis of the Inner Shear Stress Distributions of the Laminated Eucalyptus Veneer/Steel Plate Lumber
尾巨桉/金属复合材料层间剪应力分布特征的有限元解析
18.
Time history analysis of shear wall interruption conditions in frame-shear wall structures
框剪结构剪力墙中断条件的时程分析