1.
Wall-Pressure Fluctuations Measurement Using Microphone Array--Correlation Analysis of Coherent Structure in Backward-Facing Step Flow
壁面压力传声器阵列测量——后台阶湍流相干结构的相关分析
2.
A Method for Measuring Pressure of Thin-Walled Vessels Based on Surface Wave;
基于表面波的薄壁容器压力测量方法
3.
Joint measurements of surface pressure fluctuations and near-wall turbulent flow at the etern of an underwater vehicle model
水下航行体模型尾部壁面脉动压力与近壁湍动速度同步测试研究
4.
The Law of strata behaviours in Hydraulic Shortwalling A- long the Dip
倾斜短壁式水采工作面的矿山压力显现规律
5.
Large eddy simulation of wall pressure fluctuations of underwater vehicle
水下航行体壁面脉动压力的大涡模拟研究
6.
Capacity Calculation of Welded Axially Compressed Members with Thin-Walled Box Section
焊接薄壁箱形截面轴心压杆的承载力计算
7.
Study on Inclined Longwall Working Face Stress Distribution and Its Influence to Gas Pressure
倾斜长壁工作面应力分布及其对瓦斯压力影响规律研究
8.
Investigation on Bed Shear Stress in Smooth Open Channels;
光滑壁面明渠紊流壁面切应力的研究
9.
Researching on External Pressure Test Pressure Coefficient of External Pressure Vessels
薄壁外压容器外压试验压力系数研究
10.
Studies on the Interfacial Microstructure and Corrosion Resistance of Electric Resistance Pressure Welded Thin-wall Cu/Al Tube
薄壁铜铝管电阻压力焊界面的微观结构及耐腐蚀性能研究
11.
Choice of Pressure Pipe Wall Thickness and Stress-relatedIssues
压力管道壁厚选择及相关应力的问题
12.
From this solution, velocity profiles, pressure and wall shearing stresses along the tube as well as the critical Reynolds number required for the separation of the flow are determined.
从此解,决定了速度剖面、压力和沿管壁的剪应力,也决定了流动分离的临界Reynolds数。
13.
The air outside pressed the side in.
外面的空气将桶壁压得凹进去了。
14.
Phase Delay of the Reynolds Stress and Wall Pressure Fluctuations to the Strain Rate of the Large Scale Structures in Wall Shear Flows;
湍流边界层雷诺应力和壁面脉动压强相对大尺度结构变形率的相位滞后
15.
The Influence of Intricate Edge of Welded Seams in Thin-walled Pressure Vessels on Strength
薄壁压力容器焊缝错边对强度的影响
16.
Technical Study of 15CrMoR Steel on Webbing Pessure Vessel;
15CrMoR钢厚壁压力容器焊接工艺研究
17.
Research on the Optimum Design of Pressure Vessels Wall Based on Analysis;
基于ANSYS的压力容器壁厚优化设计研究
18.
The Six-jaw Hydraulic Power Chuck and Clamping Thin-walled Components
六爪液压动力卡盘和薄壁零件的夹持