1.
There are two methods for welding radial stiffeners to bias-rail box girder: welded all around and open at tensile flange.
起重机偏轨箱形梁横向加强板有加强板四周均焊和在受拉翼缘处空开2种焊接方式。
2.
A seagull hit the right wing tip, leading edge flap sustained minor damage.
右翼尖与一只海鸥相撞，前缘襟翼受到轻微损伤。
3.
However, the stud welding roots in the negative moment region of the beam are often subjected to the joint action of shear stress cycling of the studs and tensile stress cycling of steel girder flanges.
但在负弯矩处栓钉焊趾往往承受栓钉剪应力循环和钢梁翼缘拉应力循环的共同作用。
4.
Numerical Simulation of Ram-Air Parachutes with Flap Deflection;
冲压式翼伞后缘下拉气动特性的数值研究
5.
Theory Studies on the Behaviors of Beam-Column Connections with Beam-End Horizontal Haunch;
梁端翼缘扩大型梁柱节点受力性能理论分析
6.
Experimental Evaluation on the Behaviors of Beam-To-Column Connections with Beam-End Horizontal Haunch;
梁端翼缘扩大型梁柱节点受力性能的试验研究
7.
The outer rear edge of the wing of a bird, containing the primary feathers.
翼尖，前翼鸟翼的外后缘，包括初生毛
8.
The receiver aircraft is fitted with a probe that extends out from the side of the fuselage or from the leading edge of the wing.
受油机装备有一个从机身一侧或者是机翼前缘伸出的探头。
9.
Study on Behavior of Extended End-plate Connection Joint with Reduce-beam Section in Beam-to-column Weak-axis Direction
翼缘削弱型外伸式端板连接节点在梁柱弱轴方向的受力性能研究
10.
leading-edge flap position indicator
前缘襟翼位置指示器
11.
trailing-edge flap position indicator
后缘襟翼位置指示器
12.
The ailerons are movable sections along the rear edges of the wings.
副翼是机翼后缘的可动部分。
13.
a straight line connecting the leading and trailing edges of an airfoil.
连接机翼的前缘与后缘的直线.
14.
The Relation of Closing up and Separating between the New Feeling Writer and the Left Wing Literary Arena;
新感觉派作家与左翼文坛的缘起缘落
15.
The slab has provided greater fixity to the top flange, and the adjacent web gap has experienced greater deformation and has cracked first.
桥石板为上翼缘提供了很大的固结度，于是相邻的腹板间隙就经受了较大的变形并且首先开裂。
16.
Yugoslav United Left
南斯拉夫左翼联盟(南左翼联盟)
17.
She eased her injured foot into her shoe.
她小心翼翼地把受伤的脚伸进鞋里.
18.
The effects of trailing edge jets on the vortex breakdown location over a delta wing
三角翼后缘喷流对前缘涡破裂位置的影响