1.
Study on the operation data optimization of the low-load SBR in small town
小城镇低负荷SBR工艺运行参数优化研究
2.
Research on the optimal operational parameters of compound inverted A~2/O process
复合倒置A~2/O工艺优化运行参数研究
3.
Optimize Processing Parameters and Flow to Improve Hydrogenating Operation of DAO;
优化工艺参数和流程 改善脱沥青油加氢运行
4.
Study on gasification wastewater treatment by SBR process
SBR工艺处理煤气废水的最佳运行参数研究
5.
Process Study and Operating Parameter Optimization of Wet Lime Flue Gas Desulfurization Technology;
石灰湿式烟气脱硫工艺系统运行参数研究与优化
6.
Study on Desulfurization Characteristics and Operation Parameters Optimization in Complex Spouted Flue Gas Desulfurization Technique;
复合喷动脱硫工艺脱硫特性及运行参数优化研究
7.
Operation parameter of O_3-GAC process removing Chironomid larvae from drinking water
臭氧-活性炭工艺去除饮用水中摇蚊幼虫的运行参数
8.
Research on Technical Parameters and Cuttingtool Path of NC Machining Process;
数控切削加工工艺参数及刀具运动轨迹的研究
9.
The process for the treatment of the waste acid from crude benzol refining with calcining process is studied, the optimum operation data are discussed and the process is optimized.
研究了焙烧法处理粗苯精制废酸的工艺过程,探讨了最佳运行参数,优化了工艺流程。
10.
Study on Processing Parameters Optimization of Three-rolls Planetary Rolling;
三辊行星轧制工艺参数优化技术研究
11.
A Design of the "Sliding Car" Machines Game Running Parameter Measurement System Based on GPS
基于GPS的“滑行车”游艺机运行参数测量系统设计
12.
Adoption new workmanship, indefinite parameter methodology startup turbine, weed out blade's dust deposit to undertake turbine safly and economic run.
采用新工艺———滑参数法启机对叶片的盐垢进行清除,保证汽轮机安全经济运行。
13.
Motion Simulation of Die Polishing Structure and Study on the Polishing Technological Parameter;
模具抛光机构运动仿真及抛光工艺参数研究
14.
Kinematical Analysis of Cold Rolling System and Design of Processing Parameter;
冷辗扩系统运动学分析及工艺参数设计
15.
Study on the Application of Micro-flocculation/Fiber-filtration/Disinfection Process in the Municipal Wastewater Reuse Treatment and the Optimization of Motion Parameters;
微絮凝—纤维束过滤—消毒工艺在中水生产中的应用及运行参数的优化
16.
Different technological parameters of ball spinning are simulated.
对不同工艺参数下的滚珠旋压过程进行了模拟。
17.
Influence of Processing Parameters in Gas Assisted Injection Molding on Gas Penetration
气辅成型工艺参数对气体穿透行为的影响
18.
Analysis of Technological Parameters of Traveling Magnetic Field Affecting Circulation Flow Rate in RH
影响RH循环流量的行波磁场工艺参数分析