1.
Derivation and Realization on the Stiffness Equation of Uniform Section Bending Bar
等截面弯曲杆件刚度方程的推导和认识
2.
Despite this, for CSE system that is still in an initial stage, there are many aspects needing to be perfected.
但是，注册安全工程师执业资格制度在我国才刚刚建立，有许多方面还需要不断完善。
3.
The characteristics of the acceleration of the instantaneous velocity center( IVC) were presented, and the trajectory equation for pure rolling of rigid body( PRORB) was developed.
分析了瞬心的加速度特性，建立了刚体平面纯滚动的轨迹方程。
4.
The whole stiffness matrix of structural system is derived by condensation approach.
分析了结构运动方程,并采用缩聚法建立结构总侧移刚度。
5.
It can be used directly to systems with irregular story stiffness.
此方程组适用于楼层刚度变化不规则的框架剪力墙结构分析。
6.
Study of foundation stiffness and closure scheme on continuous rigid frame bridge with V-type piers
V型墩连续刚构桥基础刚度及合龙方案的探讨
7.
PARALLEL ROSENBROCK METHODS FOR STIFF DIFFERENTIAL EQUATIONS;
刚性微分方程的并行Rosenbrock方法
8.
Adams Method for Solving Stiff Delay Differential Equations;
刚性延迟微分方程的Adams方法
9.
He appreciated keenly the intensity of the strain he had just witnessed.
他深切理解到他刚才看见的紧张程度。
10.
This combination process is called the assemblage of stiffness matrices.
这种组合的过程称为刚度矩阵的装配。
11.
Research on Identifying Restraints Stiffness of Tower Structure Foundation;
高耸工程结构基础约束刚度识别研究
12.
Analysis of Control in the Course of Constructing Large-span Continuous Rigid Frame Bridge
大跨度连续刚构桥施工过程控制分析
13.
The Rigidity Analysis in Concrete Pouring Phase and Research on Rigidity in Design for CFST Truss Arch Bridge;
桁式钢管砼拱桥灌注过程刚度分析及设计刚度取值研究
14.
Another uses a range of faces, independently rated for masculinity, as its starting point, and also allows a role for colour as well as shape.
另一种是利用阳刚程度各不相同的多个脸型作为起始点，然后在颜色和形状方面做一些调整。
15.
Runge-Kutta Discretization for Stiff Delay Integro-Differential-Equations;
刚性延迟积分微分方程的Runge-Kutta离散
16.
Dual Lagrange s Equation of Multi-Rigid-Body Open-Chain Systems;
开环多刚体系统的对偶形式的Lagrange方程
17.
The study of calculated method for lateral stiffness of the high-rise buildings with twin towers and large chassis
大底盘双塔楼结构刚度控制方法研究
18.
Research on Methods to Measure the Wrap Stiffness of Freight Bogie
货车转向架抗菱刚度测试方法的研究