1.
Analysis on Stud Connectors in Steel and Lightweight Aggregate Concrete Composite Beams
钢-轻骨料混凝土组合梁栓钉连接件承载力分析
2.
Experimental studies on behavior of stud shear connectors under monotonic loads
单调荷载下栓钉连接件受剪性能试验研究
3.
Numerical analysis of stud shear connectors in SRHPC structures
栓钉剪切连接件在SRHPC结构中的数值分析
4.
Design Method of the Headed Stud Embedded at the Pinned Joint of Steel Beam to Concrete Wall
钢梁-混凝土墙铰接节点栓钉预埋件的设计计算
5.
The Statistical Distribution of Bolt-Hole Clearance in Bolt Joints;
螺栓连接件中栓孔间隙分布规律的研究
6.
Unlock the pin connector and recover it.
销钉连接器解锁，并起出销钉连接器。
7.
EXPERIMENTAL STUDY ON ANTI-SLIDING COEFFICIENT OF FRICTION TYPE HIGH-STRENGTH BOLT CONNECTORS
摩擦型高强度螺栓连接件抗滑移系数试验研究
8.
Experimental Study on the Ultimate Shear Capacity of Grouped Stud Connectors in Continuous Composite Steel-Concrete Girder Bridge;
钢—混凝土连续组合梁群钉连接件抗剪承载力试验研究
9.
Install connecting rod bolt protectors on rod bolts.
在连杆螺栓上安装连杆螺栓保护件。
10.
Bolted joints can be readily disassembled and reassembled; hence Bolts or screw fasteners are used more than other types of mechanical fastener.
螺栓连接易于装、拆;因此,螺栓或螺纹件紧固件较其它机械扣件用得更广。
11.
Frame of front-wheel double-drum component: It is of formed steel welding structure，which is connected with main frame by bolts.
前轮双转鼓组件框架：型钢焊接结构，通过螺栓与主框架连接。
12.
Component installation of nodes connected by bolts or welding required inspection Connections after passing before welding or fastening.
构件安装采用焊接或螺栓连接的节点,需检查连接节点,合格后方能进行焊接或紧固.
13.
"Bolt: Mechanical fastener, usually used with a nut, for connecting two or more parts."
螺栓:通常与螺母一起用于连接两个或更多零件的机械紧固件。
14.
double-studded flange
双头螺栓连接的法兰
15.
boiler band joining eye bolt
锅炉带圈连接眼螺栓
16.
studded-flange connection
带柱螺栓的法兰连接
17.
" Bolts, screws, nuts and accessories--Terminology and nomenclature"
GB/T3099-1982螺栓、螺钉、螺母及附件名词术语
18.
Fasteners--Clearance holes for bolts and screws
GB/T5277-1985紧固件螺栓和螺钉通孔