1.
The Theoretical Calculation of Minimum Unlock Speed of Jointed Rotating disc and Bearing
旋转圆盘与轴套装后最小松脱转速的理论计算
2.
tilting arbor variety saw
锯轴倾斜多能圆锯盘
3.
Circular disk was rotating about an axis tilted from the normal through the center.
圆盘绕一个通过中心与法线方向倾斜的轴转动。
4.
disc brake shaft locking device
圆盘式制动器轴锁紧装置
5.
Research on Rotating Mechanism of Shaft-Disk Based on Polishing Material Machine
基于抛料机轴-圆盘转动机构的研究
6.
The circular top part of a capstan, used to hold bars for turning.
绞盘头绞盘的圆形顶部，用于套住轴杆，使之旋转
7.
It's maily used to process axis type workpiece.
工作时，端面拔盘由三个活动液压推动、入工作端面，使工件与主轴同转进行外圆加工。
8.
The distance between the center of an eccentric and its axis.
偏心距偏心圆的中心与圆轴间的距离
9.
Electromagnetic Radiation Field of Evenly-charged Thin Disk Rotating Around Its Symmetry Axis;
绕对称轴转动的均匀带电薄圆盘的电磁辐射场
10.
Research on system of thin disc rotor five DOF magnetic bearing
薄圆盘形转子5自由度磁悬浮轴承系统研究
11.
Discussion of the modeling method for the dynamics on the inclined plate when rotating around a fixed axis
偏斜圆盘定轴转动时的动力学建模方法探讨
12.
They permit the friction disk to slide Back and forth along the shaft But force the disk and the shaft to rotate together.
可以使摩擦盘沿着主轴向后或向前滑动,又可使圆盘和主轴同时转动。
13.
double-action disc harrow
(双列圆盘靶) 双功圆盘靶
14.
ground-working disk blade
切土圆盘刀，耕耘圆盘
15.
Analysis to Connecting Shaft Fracture between Motor Reducer and Main Bearing of Cutting Disc of a Shield
盾构电机减速器与刀盘主轴承连接轴断裂分析
16.
Eigenvalue Estimates of Biharmonic Operate on Unit Disk and Multi Cylinder
单位圆盘与多圆柱上重调和算子的特征值估计
17.
Optimization of the stiffness of externally pressurized circular thrust gas bearing with single orifice
最大刚度下单孔静压圆盘止推气体轴承的参数优化
18.
Finite Element Analysis on Pressure Distribution of Partial Porous Aerostatic Circular Thrust Bearing
局部多孔质气体静压圆盘止推轴承压力分布的有限元计算