1.
Flared type tube fittings--Locknut
GB/T5649-1985扩口式管接头锁紧螺母
2.
Flared type tube fittings--Back-up washer
GB/T5652-1985扩口式管接头锁紧螺母垫圈
3.
" Prevailing torque type all-metal hexagon nuts, style 1"
GB/T6184-19861型全金属六角锁紧螺母
4.
" Prevailing torque type hexagon nuts (with non-metallic insert), style 2"
GB/T6182-19862型非金属嵌件六角锁紧螺母
5.
" Prevailing torque type hexagon nuts (with non-metallic insert),style 1"
GB/T889-19861型非金属嵌件六角锁紧螺母
6.
Prevailing torque type all-metal hexagon nuts with flange
GB/T6187-1986全金属六角法兰面锁紧螺母
7.
" Prevailing torque type all-metal hexagon nuts, style 2--Property class 9"
GB/T6186-19862型全金属六角锁紧螺母9级
8.
Turn the locking bolt so that it is fixed on the bake cover or the flange plate.
安装后必须将锁紧螺母锁紧在电机后端盖或法兰盘上。
9.
Malleable cast iron pipe fittings--Type size--Backnuts
GB/T3289.30-1982可锻铸铁管路连接件型式尺寸锁紧螺母
10.
" Prevailing torque type all-metal hexagon nuts, style 2--Property classes 5,8, 10 and 12"
"GB/T6185-19862型全金属六角锁紧螺母5,8,10和12级"
11.
Prevailing torque type hexagon nuts with flange (with non-metallic insert)
GB/T6183-1986非金属嵌件六角法兰面锁紧螺母
12.
To replace seat/ stem module shut off supply, loosen locknut and back off adjusting screw.
要更换阀座/杆模块，先关闭供应管道，松开锁紧螺母，退出调节螺丝。
13.
Side view of hexagonal jam nut. Selection box height represents thread diameter.
六角锁紧螺母的侧面图。选择框高度代表螺纹直径。
14.
Mechanical properties of fasteners--Prevailing torque type steel hexagon nuts
GB/T3098.9-1993紧固件机械性能有效力矩型钢六角锁紧螺母
15.
spring stop-nut locking fastener
弹簧防松螺母锁紧件
16.
After handle is reinstalled, just tighten up the nuts and washers with force. After gear box is reinstalled, just tighten up the screws and washers with even force.
重新安装把手将螺母及华司用力锁紧即可。重新安装齿轮箱将跟螺丝及华司用力平均锁紧即可。
17.
Nuts are full steel self locking eliminating temperature and moisture influence.
螺母采用全钢制自锁紧式，消除了温度以及湿度的影响。
18.
reverse anchor jam nut
反向锁闭机构紧固螺帽