1.
Represents a single-pole, single-throw switch. Right-click to open and close the switch.
表示单刀单掷开关。右击可断开或闭合开关。
2.
Study on the Closing Switch Techniques of "Z-pinch" Accelerator;
“Z-Pinch”加速器闭合开关技术研究
3.
peak making current of pole of switching device
开关装置峰值闭合电流
4.
Limit switch, directly actuated, spring returned, normally closed. Switch can be specified as open or closed.
直接启动、弹簧复位、正常闭合的限制开关。可指定开关为断开或闭合。
5.
When the switch is on, the circuit is closed and electricity goes through.
当开关打开时，电路就闭合，电流流通。
6.
Suppose the switch in the diagram is suddenly closed in the "up" position.
假设图中的开关突然闭合到“上”方。
7.
Design of straight separate switch in close assemble electric appliances;
封闭组合电器中直线隔离开关的设计
8.
KEY OFDISCONNECT THE TCM CONNECTOR.
关闭。断开ＴＣＭ接头。＊＊
9.
KEY OFF, DISCONNECT TCM CONNECTOR.
关闭，断开ＴＣＭ接头。＊＊
10.
open, shut, close, lock, bolt the door
开、 关、 闭、 锁、 栓门
11.
Represents a double-pole, single-throw switch. Right-click for open and closed positions.
表示双刀单掷开关。右击指定断开或闭合位置。
12.
Represents a double-pole, single-throw switch. Open and closed positions can be specified.
表示双刀单掷开关。可指定断开和闭合位置。
13.
Ignition Sw Out (Start)
点火开关关闭（开始）
14.
Proximity limit switch, directly actuated, spring returned, normally closed. Switch can be specified as open or closed.
直接启动、弹簧复位、正常闭合的邻近限制开关。可指定开关为断开或闭合。
15.
Note:the change-over difference means the difference between the temperature when the switch breaks and the one when the switch resets to close.
注：切换差是指开关断开时温度和开关恢复到闭合时的温度差。
16.
Knife Gate valves should preferably not be opened or closed against pressure.
刀闸阀不适合顶着压力进行开启或关闭。
17.
Hybrid Open-Close Loop FGS Coding Framework Based on Key Reference Frame
基于关键帧的开环-闭环混合FGS编码框架
18.
Disposal and Close of Major Non-Conformity of Crack of Concrete Baseplate
核设施砼底板开裂的重大不符合项处理及关闭