1.
Research on Three-Elements Constitutive Equation of Plastic Shrinkage Cracking for Cement Mortar
水泥砂浆塑性收缩开裂的三元本构方程研究
2.
Flexural Strength and Plastic Shrinkage Cracking Resistance of Aramid Fiber Cement Mortar
芳纶纤维砂浆的抗折强度与抗塑性收缩开裂
3.
Influence of fine aggregate on initial shrinkage of high performance concrete
细集料对高性能混凝土早期塑性收缩开裂的影响
4.
Effects of hydroxyethyl methyl cellulose and polypropylene fiber on plastic shrinkage cracking of cement mortar
复掺羟乙基甲基纤维素和聚丙烯纤维对水泥砂浆塑性收缩开裂性能的影响
5.
Research on Effects of Early-age Shrinkage and Plastic Cracking of High Strength Concrete;
高强混凝土早期收缩及塑性开裂影响因素研究
6.
Research on Early-age Plastic Shrinkage and Cracking of Green High Durable Concrete;
绿色高耐久性混凝土的早期塑性收缩与开裂性能研究
7.
Influence of shrinkage-reducing admixtures on the reduction of plastic shrinkage cracking in concrete
减缩剂对减少混凝土塑性收缩裂缝的影响
8.
The paper states that the plastic cracks after shaped the pumping concreting divides into plastic settlement crack and plastic shrinkage crack.
本文阐述泵送混凝土浇筑成型后产生的塑性裂缝,分为塑性沉降裂缝和塑性收缩裂缝。
9.
STUDY OF SEVERAL ISSUES ON EARLY AGE SHRINKAGE CRACKING OF HIGH PERFORMANCE CONCRETE
高性能混凝土早期收缩开裂问题研究
10.
Plastic shrinkage and crack resistance of high-strength concrete mixed with polycarboxylate superplasticizer
掺聚羧酸减水剂的高强混凝土塑性收缩与抗裂性能研究
11.
Experimental Research on Restrained Shrinkage Cracking Properties of Pumping Concrete;
泵送混凝土约束收缩开裂性能评价试验研究
12.
Influence of rubber powder on shrinkage cracking of concrete
橡胶粉对于混凝土收缩开裂性能的影响
13.
Law Research and Mechanism Analysis of Shrinkage and Cracking on High Performance Concrete;
高性能混凝土收缩与开裂规律的研究及机理分析
14.
Long-term behavior of composite beams with shrinkage,creep and cracking(Ⅱ):theoretical analysis
考虑收缩、徐变及开裂影响的组合梁长期受力性能研究(Ⅱ)——理论分析
15.
Research on Plastic Shrinkage and Durability of Lightweight Aggregate Concrete;
轻骨料混凝土塑性收缩及耐久性研究
16.
Effects of Curing on Early-age Shrinkage and Cracking of Concrete;
养护对混凝土早期收缩和开裂的影响
17.
Influence of Chemical Admixtures on the Early Cracking and Drying Shrinkage of Concrete;
化学外加剂对混凝土收缩开裂的影响
18.
Determination of shrinkage for injection moulding thermoplastics
GB/T15585-1995热塑性塑料注射成型收缩率的测定