1.
ANALYSIS ON PENETRATION DEPTH OF PROJECTILES INTO ROCK TARGETS BASED ON THE IMPROVED TWIN SHEAR STRENGTH THEORY
应用改进的双剪强度理论分析岩石靶体的弹体侵彻深度
2.
Hardening function of two-parameter twin shear unified failure criterion
双剪双参数强度准则硬化函数的探讨
3.
Plastic Limit Loading Analyses of Thick-Walled Tube Based on Twin Shear Unified Strength Theory;
基于双剪统一强度理论的厚壁圆筒的塑性极限载荷分析
4.
Bearing capacity of FRP-confined concrete based on twin shear unified strength theory
基于双剪统一强度理论的FRP约束混凝土的承载力
5.
testing methods for shear strength of plastics by punch tool
塑料剪切强度试验方法
6.
uniform strain shearing strengh tester
等应变剪切强度测试仪
7.
"Maximum shear Strength 63Kg/mm2(90,000psi) maximum (based on 75% yield) "
剪切强度最大63Kg/mm2(90000psi)(为屈服强度的75%)
8.
Testing Method for Tensile and Shear Strength of High Strength Photosensitive Glue
高强度光敏胶拉伸剪切强度测试方法
9.
Experimental Study on Shear Strengthening of RC Beams with CFRP Sheets;
CFRP加强混凝土梁抗剪强度的试验研究
10.
Shear Strength Behavior of Over-consolidation Clay in Ring Shear Tests;
利用环剪仪对超固结黏土抗剪强度特性的研究
11.
Approaching of Factors Influencing Strength Indexes for the Consolidation Quick Direct Test
直剪试验固结快剪强度指标影响因素探讨
12.
Shear strength behavior of overconsolidated clay in ring shear tests
采用环剪仪对超固结黏土抗剪强度特性的研究
13.
Research on influences of particle breakage and dilatancy on shear strength of calcareous sands
颗粒破碎及剪胀对钙质砂抗剪强度影响研究
14.
MICROSTRUCTURE AND HARDNESS OF ADIABATIC SHEAR BANDS IN HIGH STRENGTH STEELS
高强度钢中绝热剪切带的组织和硬度
15.
Experimental Study on Structural Strength and Shear Strength of the Unsaturated Loess;
非饱和黄土结构强度与抗剪强度的试验研究
16.
New Development in Strength Theory-Square Principal Shear Strength Theory;
强度理论的新发展——谈平方主剪应力强度理论
17.
Ebonite--Method of test for shearing strength
GB/T1700-1982硬质橡胶抗剪切强度试验方法
18.
testing methods for impact shear strength of adhesive bonds
胶粘剂剪切冲击强度试验方法