1.
Experiment on Welded Flange Plate (WFP) Reinforced Conneciion
钢结构焊接翼缘板加强式梁柱刚性连接的试验研究
2.
These include gusset plates welded to the flange.
这些包括焊接到翼缘上的节点板。
3.
Cracks have been found in the flange and web splices at groove welds in at least four bridges.
至少在四座桥梁的翼缘板和腹板拼接坡口焊缝中发现了裂纹。
4.
There are two methods for welding radial stiffeners to bias-rail box girder: welded all around and open at tensile flange.
起重机偏轨箱形梁横向加强板有加强板四周均焊和在受拉翼缘处空开2种焊接方式。
5.
Small rectangular backup bars were used to fabricate the web-bottom flange connection.
在腹板与下翼缘的施焊中使用小矩形挡板。
6.
The second crack is a crack originating at the groove weld toe of the column flange-girder flange connection.
第二种是产生于立柱翼缘与主梁翼缘连接处的坡口焊缝焊趾处的裂纹。
7.
spiral welded-on wing stabilizer
焊接螺旋翼片式稳定器
8.
Study on Behavior of Extended End-plate Connection Joint with Reduce-beam Section in Beam-to-column Weak-axis Direction
翼缘削弱型外伸式端板连接节点在梁柱弱轴方向的受力性能研究
9.
STUDY ON DAMAGE MONITORING FOR FLANGE AND WEB JOINT OF SECTION USING VIBRATION EXCITATION
基于振动理论的型钢翼缘腹板连接处损伤监测方法的研究
10.
a straight line connecting the leading and trailing edges of an airfoil.
连接机翼的前缘与后缘的直线.
11.
The Welding of Printed Board--On Teaching “Handwork” Welding Techniques;
印制板焊接——“手工”焊接技术教学
12.
The web and flanges of the main girders were fabricated from ASTM A441 steel.
主梁的腹板和翼缘用ASTM A441钢制造。
13.
Steel plates for welded gas cylinders
GB6653-1994焊接气瓶用钢板
14.
welding of tube-tubesheet
管子与管板氩弧焊接
15.
Welding of Stainless Clad Steel Plate 14Cr1MoR+347H
14Cr1MoR+347H不锈钢复合板焊接
16.
Effective Width and Plate-to-Plate Restriction Calculations of Profiled Steel Sheeting
压型钢板翼缘有效宽度及板组约束的研究
17.
a hinge mortised flush into the edge of the door and jamb.
直接被焊接到门和柱的边缘的铰链。
18.
Quality Control of the Fillet Weld in the Tube and Tube Sheet of Heat Exchanger
换热器管-管板角焊缝焊接质量的控制