1.
The Study of Warp Tension Control System Based on Nios;
基于Nios软核的经纱张力控制系统的研究
2.
Application of Magnetostrictive Pick-up to Constant Tension Control of Warp;
织机恒经纱张力控制中磁致伸缩传感器的应用
3.
Analysis on the Dynamic Behavior of Back Rest System and the Control of Warp Tension for an Air-jet Loom;
喷气织机后梁系统动态行为分析与经纱张力控制
4.
Fuzzy Parameter Self-Tuning PID Control for Warp Thread Tension Control
经纱张力的模糊参数自整定PID控制研究
5.
The Research on the System of Controlling of Spinning Tense--The Single Spinal and the Single Motor;
单锭单电机细纱张力控制系统的研究
6.
Study on Yarn Tention Control System of Carpet Tufting Machine
地毯簇绒机绒纱张力控制系统的研究
7.
In weaving, the warp and filling tensions are very important factors and have to be controlled.
在织造过程中,经、纬纱张力是非常重要的参数,必须加以控制。
8.
Each end has to be controlled, therefore one tension device per end is needed.
每根纱线都应单独控制,因此每根纱线都需要一个张力装置。
9.
It is the function of the let- off motion to control the warp tension, so, to achieve the required result, both the take- up and the let- off motions must be functioning correctly.
控制经纱张力是送经机构的功能,因此要获得理想的结果,卷取机构和送经机构必须正常工作。
10.
As is usual with most textile operations, it is necessary to control tension such that all ends are as nearly as possible.
与多数纺织工艺相同,在整经中有必要对纱线张力施加控制,以使所有纱线具有尽可能一致的张力。
11.
Beat - up, Warp and Fabric Control
打纬,经纱与织物的控制
12.
The force required to turn the beam is supplied by the tension in the warp yarns.
织轴的转动靠的是经纱张力的驱动。
13.
Development of testing system of warp tension based on optical fiber force sensor
基于光纤力传感器的经纱张力测试系统
14.
When this happens, the warp tension will increase, and the pick - spacing will be closer than normal until the roller frees itself.
在这种情况下,经纱张力会增加,纬纱间距会小于正常值。
15.
These breakage could be the result of excessive tension or, perhaps, a weak spot in the yarn.
断头的原因可能是经纱张力过大或纱线中存在弱段。
16.
Embedded System for Warp Tension Based on ARM7TDMI and uClinux Architecture;
基于ARM和uClinux的经纱张力嵌入式系统设计
17.
The technology of improving warp tension fluctuation of loom and reducing sparsity denseness road
改进织机经纱张力波动及降低稀密路技术
18.
Neither objective will be achieved if the warp tension is allowed to vary.
如果经纱张力有波动,则均匀的纬纱间距和均匀的纬纱密度两者都不能得到保证。