1.
Stress and deformation of filament-wound thick-wall cylinder pressure vessels
纤维缠绕厚壁柱形压力容器的应力和变形
2.
Fea of Stress and Deflection in Dies of Tube Hydroforming;
内高压模具应力和变形规律有限元分析
3.
Analysis of Stress and Deformation for Concrete Faced Rockfilll Dam by FLAC3D-based Redevelopment
基于FLAC3D的混凝土面板堆石坝应力和变形分析
4.
The Stress and Deformation Analysis of Planary Blades of Half-Revolution Blade Propellers
半转叶片推进器直翼叶片应力和变形分析
5.
The Triangle Suspended Wagon Principal Truss Stress and Distortion Computation and Actual Difference
三角挂篮主桁架应力和变形计算与实际差别
6.
stress-formation diagram
胁强[应力]-形变图
7.
Law of Consolidation Creep Strain and Stress Relaxation in Saturated Soft Clay
饱和软粘土固结、蠕变变形和应力松弛规律
8.
Deformation characteristics of coarse-grained materials during cyclic loading of deviatoric and spherical stresses
偏应力和球应力往返作用下粗粒料的变形特性
9.
Prediction of Welding Deformation & Residual Stress by FEM;
用有限元法预测焊接变形和残余应力
10.
Mechanics Analysis of Casing Deformation Under Non-uniform In-situ Stress and Its Repair
非均匀地应力下套管变形和整形复位分析
11.
The influence of different deformation temperature and different deformation rate on SUS316L stainless steel flow and mircostructure
不同变形温度和变形速率对SUS316L不锈钢流变应力及金相组织的影响
12.
Preliminary Research of Internal Force and Deformation of Bridge with Variational Principle;
应用变分原理研究桥梁的内力和变形初探
13.
Elastic-plastic deformation effect on distribution of stress and axial force in a threaded bolt
弹塑性变形对螺栓应力和轴力分布的影响
14.
ANN Models of Flow Stress of Hot Deformation and Microstructure Evolution in Hydrogenized BT20 Alloy;
含氢BT20合金热变形流变应力和组织演变的ANN模型
15.
DEFORMATION PROPERTIES OF SATURATED CLAY UNDER AXIAL SYMMETRY STRESS CONDITION
轴对称应力条件下饱和粘土的变形特性
16.
Experimental study on shearing deformation behavior of saturated clay under cyclic stress
循环应力下饱和黏土剪切变形特性试验研究
17.
Coupling Deformation and Stresses Between Layers in Sandwich Bar with Closed Section
封闭截面夹芯杆的耦合变形和层间应力
18.
Model Building Technique Study of Weld Residual Stress and Distortion;
焊接残余应力和残余变形分析的建模技术研究