1.
EXPANDING CONNECTION TECHNOLOGY FOR HEAT EXCHANGE TUBES IN CROSS-PIPE PRIMARY COOLER
横管式煤气初冷器的换热管胀接工艺研究
2.
Finite Element Simulation of Bulge Forming Process of the LF2M Anti-rust Aluminum Pipe Coupling Based on Damage Development Model
基于损伤理论的LF2M管接头胀形工艺模拟
3.
Workpiece deformation of flexible expansion ring and processing technology research
弹性胀圈工件变形与加工工艺的研究
4.
Numerical Simulation of Hydroforming Process for Automobile Rear Axle Housing;
汽车后桥壳液压胀形工艺的数值模拟
5.
Study on the Method and Equipment of Hydraulic Expansion with Additional Liquid for 300MWMn18Cr18N Retaining Ring;
300MWMn18Cr18N护环外补液胀形工艺及设备研究
6.
Research on Gas Blowing Forming of AZ80 Magnesium Alloy Sheet
AZ80镁合金板材气压胀形工艺基础研究
7.
Control of Filamentous Bulking in the A/O Biological Phosphorus Removal Process
A/O生物除磷工艺丝状菌膨胀的控制
8.
Analysis and Countermeasures of Sludge Bulking in MSBR Process
MSBR工艺污泥膨胀的分析与对策
9.
Thin-walled Tube with Small Radius and Internal Medium Pressure Forming Technique
薄壁小半径弯管与中压内胀成形工艺
10.
On Expansibility of Copper Separation with W/O/W Emulsion Membrane
乳状液膜法分离铜工艺中的溶胀问题
11.
Comparison between Direct Ammonia Distillation and Indirect Ammonia Distillation
直接蒸氨工艺与间接蒸氨工艺的比较
12.
Study on the Construction Technologies of Subgrade of Lime Improved Expansile Earth;
膨胀土路基石灰改良施工工艺试验研究
13.
Research on 30CrMnSi Pipe Mechanical Expanding, Licking and Tucking Process;
薄壁30CrMnSi钢管胀形、翻边、缩口加工工艺研究
14.
Construction process of self-compacting minimum inflation high compressive strength concrete-filled steel tube
自密实微膨胀高强钢管混凝土的施工工艺
15.
STUDY ON TREATMENT OF BREWERY WASTEWATER WITH THE ANAEROBIC ATTACHED MICROBIAL FILM EXPANDED BED PROCESS
厌氧附着膜膨胀床工艺处理啤酒废水的研究
16.
Study on the Mechanism and Technology of Municipal Sewage Degradation by Anaerobic Expanded Bed;
厌氧膨胀床处理城镇污水工艺和机理研究
17.
FEM Simulation and Processing Parametaers Optimization on Hydroforming of the Cucurbit Bottle;
异形瓶液压胀形数值模拟及工艺参数优化
18.
Simulation of the Multi-tube Hydraulic Bulging and Its Controlling Model Study;
多通管液压胀形工艺仿真及成形控制模式研究