1.
Study on Robot s Absolute Accuracy Calibration Based on Distance Error Model;
基于距离误差模型的机器人绝对精度标定研究
2.
Measuring Transport Distance Errors in Customer Cluster for Facility Location;
设施选址中客户汇集引起的运输距离误差
3.
The Least Distance of Vectors Color Error Diffusion Method Used in Given Colors System
适用于已给定颜色处理的彩色矢量最小距离误差扩散算法
4.
ESTIMATIONS OF ERROR FOR INTERPOLATION NEURAL NETWORKS IN DISTANCE SPACES
距离空间中插值神经网络的误差估计
5.
This last error depends on the wire spacing and diameter.
后者引起的误差取决于导线的距离和直径。
6.
Distance-weighted Quadric Error Metric Simplification Algorithm Based on Triangle Collapse;
基于距离加权的二次误差测度的网格简化算法
7.
If a bay is inclined to the general line of the base at an angle of 10 mm in 24m, the error will be 0.1 ppm.
如果一个尺段偏离基线总方向的角度相应于24米距离上的10毫米，则误差为0．1×10-6。
8.
The difference in longitude between two positions as a result of movement to the east.
东距两地间经度差，指向东移动的距离
9.
Usually the rake body makes the static readings high, and by shortening the tipstatic-orifice distance the error can be eliminated.
一般排管架使静压读数偏高，缩小管端静压孔的距离可以消除这个误差。
10.
For spaceborne SAR system with large squint angle, the main error source of classical range| Doppler algorithm is analyzed which causes the loss in image quality.
分析了当天线斜视角增大时，导致传统距离－普勒成像算法性能下降的主要误差来源。
11.
Some of the observer errors associated with timing over a measured length may be overcome by the use of the enoscope.
观测员在测定车辆通过已知距离的时间中所发生的误差，可利用一种人形视车镜加以消除。
12.
For spaceborne SAR system with large squint angle, the main error source of classical range-Doppler algorithm is analyzed which causes the loss in image quality.
分析了当天线斜视角增大时，导致传统距离－多普勒成像算法性能下降的主要误差来源。
13.
Some Misunderstandings on the Research into the Gap between the Rich and the Poor in ChinaDifferentiating Three Misunderstanding in Researching the Gap between povertyand richness;
我国贫富差距研究中的三个误区辨析
14.
Measurement and Error Analysis of Overhead Line Arc Sag with Large Pole Span
大档距架空线弧垂测量及其误差分析
15.
Study on Pitch Error Compensation of SINUMERIK 810D/840D CNC System
SINUMERIK810D/840D数控系统螺距误差补偿技术研究
16.
Judging and Repairing about thread gauges close distance error
螺纹量规紧密距值误差的判断与修复
17.
Exact Calculation of the Bit Error Rate for Maximum-Distance-Separable (MDS) Codes
最大距离分割码误比特率的精确计算
18.
The application of error separation techniqu in axis turing error measurement
误差分离技术在主轴回转误差检测中的应用