1.
pressure regulator of engine unloading valve
发动机卸荷阀调压器
2.
The Application of an Unloading Valve for the Billet CCM
一种卸荷阀在小方坯连铸机上的应用
3.
Study and Application on Performance Test System of Automobile air Brake Unloading Valve;
汽车气制动卸荷阀性能测试系统的研究与应用
4.
Simulation Research on the Dynamicproperty of On-Off Cartridge Valve and the Pressuer Descending Property of Unloading Cartridge Valve
插装阀动特性与液压机预卸荷插装阀组卸压特性仿真研究
5.
Remove the relief valve cover bolts while holding the cover down.
边压住阀盖，边拆卸安全阀阀盖螺栓。
6.
Remove the relief valve cover, stem/diaphragm assembly, and relief valve spring.
拆卸安全阀阀盖，阀杆/隔膜总成，和安全阀弹簧。
7.
Remove valve spring and retainer.
拆卸阀弹簧和扣件。
8.
Remove TPS from throttle body.
从节气阀体拆卸TPS
9.
cargo loading manifold
货油装卸系统分路阀箱
10.
Remove check valve and valve seal from booster.
从倍力器上卸去逆止阀和阀门密封。
11.
Remove the pressed in relief valve seat and seat O-ring.
拆卸压进去的安全阀阀座和阀座O形环。
12.
hydraulic hitch system with unloading function
卸荷式液压悬挂系统
13.
balance vane pump
双作用卸荷式叶片油泵
14.
ACOUSTIC RESPONSES TO ROCK CORE UNLOADING-DISTURBANCE AND UNLOADING-SENSITIVE ROCK MASS
岩芯卸荷扰动的声学反应与卸荷敏感岩体
15.
Remove the cover plate of the relief valve by removing the four connecting screws.
通过拆卸四个连接螺丝来拆卸安全阀盖板。
16.
The relief valve should be able to be removed by unscrewing the relief valve from the housing.
通过从外壳上旋下安全阀应该能够拆卸安全阀。
17.
Use socket wrench to remove regulator seat for replacement.
采用套筒扳手来拆卸调节阀阀座进行更换。
18.
Remove the body bolts from the body using an Allen Key.
采用内六角扳手从阀体上拆卸阀体螺栓。