1.
FE Analysis on Contact During the Meshing Process of Heavy-load Marine Helical Gears
船用重载斜齿轮啮合过程接触有限元仿真分析
2.
Elastic deformation static analysis method of globidal cam during the tooth transmission
弧面凸轮啮合过程中的弹性变形静力学分析
3.
The structure and principle of reciprocating positioning chain are introduced, and the meshing process is analyzed also.
介绍循环定位链传动的结构及工作原理，并分析啮合过程。
4.
FEA of Contact Stresses in Involuate Cylindrical Gear Meshing
渐开线直齿圆柱齿轮啮合过程接触应力有限元分析
5.
Theoretical and Experimental Study of NI-MPE in Intermeshing Co-Rotating Twin-Screw Extrusion;
啮合同向双螺杆挤出过程非啮合多过程元件的理论及实验研究
6.
A Global Model for Polymer Flows in Co-rotating Twin Screw Extruder;
啮合同向双螺杆挤出机挤出过程模拟研究
7.
FEM analysis of structure of shearing-meshing rotor during the mixing process
混炼过程中剪切啮合型转子的有限元结构分析
8.
Engagement Analysis of Conical Twin-screw and Dynamic Simulating of the End Section
锥双螺杆的啮合分析及其端面过程动态模拟
9.
Influence of Screw Configurations on Grafting Reactive Extrusion in Co-Rotating Twin Screw Extruder;
啮合同向双螺杆构型对接枝反应挤出过程影响的研究
10.
Study on Screw Configurations of S Element in Intermeshing Co-Rotating Twin-Screw Extrusion;
啮合同向双螺杆挤出过程S型元件螺杆构型的研究
11.
Theoretical and Experimental Study of TME in Intermeshing Co-Rotating Twin-Screw Extrusion;
啮合同向双螺杆挤出过程斜齿齿型盘元件的理论实验研究
12.
Study on the Processing-Rheology-Morphology Relationships of Polymer Blends in a Modular Intermeshing Co-rotating Twin Screw Extruder and Its Sub-cluster Statistical Theory;
啮合同向双螺杆挤出过程中聚合物共混体系流变相态学及其群子统计理论的研究
13.
Numerical Simulation of Reactive Extrusion Processes for Free Radical Polymerization in Counter-rotating Twin Screw Extruder;
啮合异向旋转双螺杆挤出机内自由基聚合反应挤出过程的数值模拟
14.
ENGAGEMENT EQUATION AND CURVATURE ANALYSIS OF SPHERICAL INDEXING CAM MECHANISM
球面空间分度凸轮机构的啮合方程与曲率分析
15.
And it get variety regulation about extreme phase difference and minimum contact ratio of interim gear and gear of roller，by analyzing all data that came from optimal design process.
同时通过对优化过程数据分析，得出介轮同轧辊齿轮啮合最小重合度同极限相位差的相应变化规律。
16.
To join or attach by means of a joggle.
榫接，啮合用啮合扣或接榫连接或安装
17.
A Periodically Time-varying Mesh Stiffness Model for Spur Geared System Considering the Effect of Extended Tooth Contact
考虑延长啮合时齿轮副啮合刚度模型
18.
Insert front cable through the parking brake lever basInsure the cable retainer is seated into the base.
将前钢缆穿过手刹车拉杆底座。钢缆扣件务必啮合到底座。