1.
The Analysis of Square Bird-beak SHS Joint Subject to In-plane Bending Moment
方管“鸟嘴”型相贯节点平面内抗弯承载力的性能研究
2.
The Ultimate Load-Carrying Capacity in-Plane of Tapered Member;
楔形压弯构件平面内稳定极限承载力
3.
Experimental Verification on the Calculation of the Castellated Beam-Columns′ Stability and Carrying Capacity in Plane
蜂窝式压弯构件弯矩作用平面内稳定承载力计算的试验验证
4.
Research on the Bending Rigidity and Gusset Plates Stability of Tube-gusset K-joints
平面K型管板节点抗弯刚度及节点板稳定承载力研究
5.
The In-Plane Stability Carrying Capacity Analysis of Beam-Columns Considering the Post-Buckling Strength of the Web;
考虑腹板屈曲后强度压弯构件平面内稳定承载力研究
6.
Performance Study on Right Section Bending Resistance Bearing Capacity of New Styles Composite Plates;
新型复合板正截面抗弯承载力性能研究
7.
The Ultimate Bearing Capacity Experiment Research and Reliability Analysis of the Concrete Sandwich Roof Slabs;
CS屋面板抗弯承载力试验与可靠性分析
8.
Evaluation on Flexural Capacity of Existing Reinforced Concrete Bridges;
既有钢筋混凝土桥梁正截面抗弯承载力评估
9.
Sectional Bending Capacity of Restrained RC Beams during Heating and Cooling Phases
升降温全过程混凝土梁截面抗弯承载力分析
10.
DESIGN RECOMMENDATIONS ON FLEXURAL CAPACITY OF FRP-REINFORCED CONCRETE BEAMS
FRP筋混凝土梁正截面抗弯承载力设计研究
11.
Research on In-plane Ultimate Bearing Strength of Tapered Column;
楔形变截面柱平面内稳定承载力研究
12.
The Test and Theory Study in the In-Plane Stability Capacity of Hot-rolled H-section Columns under Eccentric Load;
热轧H型钢偏心受压构件在弯矩作用平面内极限承载力的理论与试验研究
13.
Effects of Reinforcing Bar Amount on Bending-resistance Bearing Capacity of Single-side Reinforced Rectangular Beam
纵向钢筋配筋量对单筋矩形截面梁截面抗弯承载力的影响
14.
Analysis of the Anti-bending Bearing Capacity Calculation of Inverted T Reinforced Steel Concrete Composite Cross-section Beams;
倒T型钢混凝土组合梁正截面抗弯承载力计算分析
15.
Calculation Method of Normal Section Flexural Capacity of Corroded Reinforced Concrete Rectangular Beams
锈蚀钢筋混凝土矩形梁正截面抗弯承载力计算方法
16.
Non-linear analysis on cast tubular T-joints loaded by out-plane bending
平面外弯矩作用下的T形铸钢节点承载力非线性分析
17.
Research on out-of-plane shear capacity of brick masonry walls with pilaster reinforced by GFRP
GFRP加固带壁柱砖墙平面外抗剪承载力研究
18.
RESEARCH ON IN-PLANE STABILITY BEARING CAPACITY OF LIPPED H-SECTION TAPERED MEMBERS UNDER COMPRESSION AND BENDING
卷边翼缘工形变截面构件在压弯荷载作用下平面内稳定承载性能研究